V6-200

Design:	V
Size:	6
Width:	15
Height:	16
Lenght:	200
Thread size:	M6
Material:	standard

CLK131 25x50

High-quality internal clamping set CLK131, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting without axial hub displacement, for high torques, CMT Line

€24.40

ULV35-3440

Floating bearing rail ULV35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€824.56

KRV16-PP-A-NMT

Stud type track roller KRV.. without eccentric, outer ring profile optimized, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA

€30.87

CLK133 38x65

High-quality internal clamping set CLK133, backlash-free shaft-hub connection, self-centering design: radial standard height - short axial width, mounting without axial hub displacement, for medium to high torques, CMT Line

€20.26

ULV35-1920

Floating bearing rail ULV35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€489.05

Sold out

GR6-600

Single guide rail GR6.., cross roller guides, made of alloyed special steel, through-hardened, 90° V-profile, running surfaces precision ground, fixing holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€335.68

Details

CLK139 38x60

High-quality internal clamping set CLK139, backlash-free shaft-hub connection, self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

€33.04

ULV35-2400

Floating bearing rail ULV35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€585.62

GR6-100-D-AA6-5

Linear unit GR6..-AA6.., cross roller guideways, two 100mm long guide rails and roller cage made of steel sheet with 5 cylindrical rollers, fixing holes with 25mm start and end spacing and 50mm intermediate spacing, Rosa Sistemi

€148.25

CLK500 22x55

Rigid shaft coupling CLK500, backlash-free, bending and torsionally stiff shaft-to-shaft connection, self-centering design, mounting without axial hub displacement, for medium to high torques, CMT Line

€28.16

Sold out

NSW35-Y-4-2RS-B

NSW-Slider, Compact Rail, robust design, electrolytically galvanized and passivated steel body (Rollon Aloy), with four prismatic roller bearings -2RS sealed in configuration B, wipers on both ends, for use in T- and U-rails, Rollon

€452.64

Details

V3-125

Single slide rail V3.., linear sliding guideways, made of special alloy steel, 90° V-profile, smooth running surfaces without antifriction material, mounting holes with 12.5mm start and end distances and 25mm intermediate distances, Rosa Sistemi

€87.47

Sold out

T4FR22.150

Carriage T4FR.., with body made of anodized aluminum and four ball bearing guide rollers of type FR.., suitable for FWS.. rails, Nadella

€342.03

Details

Sold out

NSD35-N-5-2RS-A

NSD-Slider, Compact Rail, robust design with nickel-plated steel body, for mounting parallel to the load direction - configuration A, with five prismatic roller bearings -2RS sealed, wipers on both ends, for use in T- and U-rails, Rollon

€615.18

Details

V9-200

Single slide rail V9.., linear sliding guideways, made of special alloy steel, 90° V-profile, smooth running surfaces without antifriction material, mounting holes with 50mm start and end distances and 100mm intermediate distances, Rosa Sistemi

€175.86

Product information "V6-200"