ZM06

Bore diameter:	6
Outer diameter:	16
Width:	8
Thread size:	M6x0,5
Material:	standard

NATV5-X-PP-A

Yoke type track roller NATV.., single row, thick-walled outer ring with cylindrical surface, axial guidance via thrust washers, with inner ring, full complement, three-stage sealing on both sides, INA

€19.57

KR16-X-PP-A

Stud type track roller KR..X without eccentric, outer ring with cylindrical profile, solid roller pin, needles cage-guided, with axial guidance, sealing by plastic axial plain washer on both sides, INA

€30.51

Sold out

R060230856

Standard linear bushing KBM-8-DD, linear bushings, closed robust all-metal design, hardened and ground sleeve, guide cage made of PA/POM, with two integrated wiper seals, ungreased, Rexroth

€23.55

Details

PAP1415-P10 - 2500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€2,061.15

PAP1412-P10 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€148.79

PAP1420-P200 - 1000x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€3,827.46

PAP1410-P180 - 500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€545.32

PAP1420-P180 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€164.17

DGEG06-E

Spherical-plain bearing, sliding combination steel / steel, series G, Durbal

€4.55

PAF14120-P180 - 100x

Flanged bushing PAF.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€149.47

KRV16-PP

Игольчатый кулачковый ролик с цапфой, наружнее кольцо с профилем R500, без сепаратора (полнокомплектный), с шлицем под отвертку, уплотнения с обеих сторон, IDC

€21.90

CLK110 9x16

High-quality internal clamping set CLK110, backlash-free shaft-hub connection, self-centering design: radially flat - axially long, mounting without axial hub displacement, for medium to high torques, CMT Line

€21.76

Sold out

GC16-SW

Full complement single row track roller GC.. with threaded stud, profiled outer ring with optimized radius, concentric, without seals, incl. lock washer and nut, Nadella

€55.76

Details

Sold out

ZM8

Precision lock nut ZM.., light series, for preloading bearings for screw drives, with two radially placed clamping pins, BGL

€21.79

Details

IR12X16X16-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€4.63

Product information "ZM06"