ZM65

Bore diameter:	65
Outer diameter:	85
Width:	16
Thread size:	M65x2
Material:	standard

PAP8055-P200 - 1000x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€24,074.31

PWTR45-2RS-XL

Yoke type track roller PWTR.., with profiled outer ring (contact optimized surface), with center rib and full complement double-row cylindrical roller set, with axial guidance, full complement roller set, protected lip seals on both sides, INA

€118.98

PAP80100-P180 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€26,965.38

Sold out

32912-H

Tapered roller bearing 329.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG

€39.54

Details

PAP80100-P180 - 25x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€772.26

LR208-2RS

Single row track roller LR2.., deep groove ball bearing based, without pin, thick-walled outer ring with crowned lateral surface of R=500mm, with plastic cage, lip seals on both sides, INA

€63.60

2209-K-TVH-C3

Self-aligning ball bearing 22.., double row radial ball bearings, tapered bore with 1:12 taper, open, with plastic cage, not greased, FAG

€34.07

NCF2912-V

Single row cylindrical roller bearing, support bearing, two fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, full complement rolling set, IDC

€61.09

QJ209-XL-MPA-C3

Four-point contact bearing QJ2.., radial ball bearings, single row, non self-retaining, solid outer ring without retaining grooves, split inner ring, with brass cage, open design, FAG

€56.54

Sold out

10X22209-EA-K-W33-EE-C3

Double row spherical roller bearing tapered bore, groove and lubrication holes on outer ring, contact seals on both sides, SNR

€73.35

Details

NJ209-E-XL-M1

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with two-piece roller guided brass cage, FAG

€84.51

CLK132 55x85

High-quality internal clamping set CLK132, backlash-free shaft-hub connection, self-centering design: radial standard height - short axial width, mounting with axial hub displacement, for high torques, for medium to high torques, CMT Line

€27.26

Sold out

NU2209-E-XL-JP1-C3

Single row cylindrical roller bearing NU2.., non-locating bearing, two locating ribs on outer ring, inner ring without ribs with cylindrical bore, open, non-greased, separable, with steel cage, FAG

€55.09

Details

Sold out

GC85-EE-SW

Full complement single row track roller GC.. with threaded stud, profiled outer ring with optimized radius, concentric, with plastic seals, incl. lock washer and nut, Nadella

€309.37

Details

209-XL-NPP-B

Self-aligning deep groove ball bearing 2..-NPP-B, radial insert ball bearing with spherical outside surface of the outer ring, cylindrical bore for fit, compensating for misalignment, sealed on both sides, with plastic cage, INA

€34.05

Product information "ZM65"