GYE30-KRR-B-FA107
Product information "GYE30-KRR-B-FA107"
| Bore diameter: | 30 |
|---|---|
| Outer diameter: | 62 |
| Width: | 38,1 |
| Cage: | polyamide, hard fabric |
| Material: | standard |
Similar products
Product number:
1045959
Manufacturer:
INA
EAN:
4012802784565
Weight:
0.3 kg
Radial insert ball bearing GYE.., spherical outer ring surface, grub screws in inner ring for location on shaft, compensating for misalignment, sealed on both sides, with plastic cage, relubricatable, INA
Skip product gallery
KBS40
Regular price:
€62.58
Linear ball bearing KBS.. for shaft guidance systems, machined range, slotted design, outer ring hardened and ground, high-precision guidance in plastic cage, without seals, INA
Sold out
R067304000
Regular price:
€85.98
Super linear bushing KBB-O-40 without misalignment compensation, linear bushings, open design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, without wiper seals, Rexroth
Sold out
PKR62-C-NX-V
Regular price:
€517.76
Corrosion-resistant guide roller PKR.. with tapered roller bearing, track roller, eccentric, with Viton-seals (up to 120°C), incl. lock washers and nuts, Nadella
Sold out
FKY62-C-NX
Regular price:
€631.52
Corrosion-resistant guide roller FKY.. with tapered roller bearing, convex raceway sides, inner ring with holes for fixing on the shaft, with NBR seals type RS on both sides, Nadella
Sold out
NUP206-E-XL-M1
Regular price:
€68.38
Single row cylindrical roller bearing NUP2.., locating bearing, two locating ribs on outer ring, inner ring with locating rib and rib washer, cylindrical bore, open, non-greased, with two-piece roller guided brass cage, FAG
NNF5007-PP
Regular price:
€70.97
Double row cylindrical roller bearing, locating bearing, three fixed ribs on inner ring, one fixed center rib on outer ring, full complement roller set, sealed on both sides, IDC
PAW38-P10 - 10x
Regular price:
€31.06
Thrust washer PAW.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®
S206 - CB206
Built-in sprag freewheel CB2.., not self-centering (non bearing supported), one keyway on outer ring, CTS
Price on request
EFN25-20-502
Regular price:
€55.19
Heavy-duty rod end EFN.. with pressed spherical-plain bearing, sliding pair steel-steel, series E/EH, female left hand thread, zinc plated, relubricatable, Durbal
Sold out
7305-B-XL-TVP-P5
Regular price:
€47.54
Angular contact ball bearing 73..-B-TVP, single-row, contact angle α = 40°, with solid polyamide cage, open - without seals, not greased, FAG
Sold out
R067314040
Regular price:
€87.16
Super linear bushing KBB-O-40-D without misalignment compensation, linear bushings, open design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, without wiper seals, Rexroth
B71908-E-T-P4S-UL
Regular price:
€61.50
Super precision angular contact ball bearing (spindle bearing), contact angle α = 25°, universal design, APA
KR62-X-PP
Regular price:
€78.40
Track roller with solid roller stud, with cage-guided needles and cylindrical outer ring, with hexagon socket, seals on both sides, IDC
ZARN2062-TV-A
Regular price:
€544.38
Needle roller axial cylindrical roller bearing ZARN, combined axial radial high-precision bearings for screw drives, light series, double direction, without locating holes, INA
Sold out
R073314040
Regular price:
€133.51
Super linear bushing KBH-O-40-D for high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with wiper seal on one side, Rexroth