3203-BD-XL-2Z-TVH-C3

€23.69

Ready for dispatch within 3-5 working days: 99

Product number: 1040652

Manufacturer: FAG

EAN: 4012802481990

Weight: 0.09 kg

Product information "3203-BD-XL-2Z-TVH-C3"

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, with plastic cage, steel shields on both sides, FAG

Bore diameter:	17
Outer diameter:	40
Width:	17,5
Sealing:	cover shields on both sides
Cage:	polyamide, hard fabric
Bearing clearance:	C3 (slightly increased)
Material:	standard

Similar products

Sold out

IR35X40X20,5-EGS

Inner ring IR..-EGS for needle roller bearings, cylindrical, made of hardened rolling bearing steel, surface ground without twist, without lubrication hole, INA

€12.86

Details

DGIR15-UK

Standard rod end DGIR..-UK with pressed spherical plain bearing, sliding pair steel-PTFE, series E, female right hand thread, zinc plated, maintenance-free, Durbal

€10.96

Sold out

GCUR40

Full complement single row track roller GCUR.. with threaded stud, with profiled outer ring, eccentric, without seals, incl. lock washer and nut, Nadella

€174.12

Details

NATR17-PP-A

Yoke type track roller NATR.., single row, thick-walled outer ring with profiled surface, axial guidance via thrust washers, with inner ring and needle roller and cage assembly, three-stage sealing on both sides, INA

€38.59

DSIL15-ES

Standard rod end DSIL..-ES with pressed spherical plain bearing, sliding pair steel-steel, series E, female left hand thread, zinc plated, relubricatable, Durbal

€9.56

Sold out

R065813030

Compact ball bushing KBC-30-D-NR, ball bushing guides, stainless material, POM ball retainer, normal radial internal clearance, wiper seal on one side, without grease, Rexroth

€43.82

Details

PWKRE40-2RS-XL

Stud type track roller PWKRE.., solid roller pin with eccentric collar, thick-walled outer ring with centre rib and profiled outer surface, with axial guidance, full complement double-row cylindrical roller set, lip seals on both sides, INA

€79.26

LRE8

Adjusting nut LRE.., spring nuts for precise adjustment, balanced radial locking, clamping system with two clamping screws on two spring-loaded threaded surfaces, grooves: 4x90°, Sfero-Nadella

€111.75

Sold out

R067225440

Super linear bushing KBB-25-DD-RT without misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, with two integrated wiper seals, Rexroth

€53.11

Details

PWTR17-2RS-XL

Yoke type track roller PWTR.., with profiled outer ring (contact optimized surface), with center rib and full complement double-row cylindrical roller set, with axial guidance, full complement roller set, protected lip seals on both sides, INA

€45.34

NATV17-PP

Yoke type track roller with profiled outer ring (contact optimized surface), with inner ring, full complement needle set, seals on both sides, IDC

€30.14

Sold out

R073222540

Super linear bushing KBH-25-DD for high loads, with misalignment compensation, linear bushings, closed design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with two integrated wiper seals, Rexroth

€83.78

Details

KRV40-X-PP-A

Stud type track roller KRV..X without eccentric, outer ring with cylindrical profile, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, INA

€59.58

E316-ZZ

Profiled guide roller E..-ZZ with pin, double row bearing, eccentric, steel shields on both sides, incl. lock washer and nuts, CTS

€38.59

Sold out

R074223030

Standard linear bushing KBMM-30-DD-NR, tandem with centered square flange, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€763.49

Details