3203-BD-XL-TVH-L285

€21.64

Ready for dispatch within 3-5 working days: 81

Product number: 1040656

Manufacturer: FAG

EAN: 4012802645002

Weight: 0.1 kg

Product information "3203-BD-XL-TVH-L285"

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, open design with plastic cage, FAG

Bore diameter:	17
Outer diameter:	40
Width:	17,5
Cage:	polyamide, hard fabric
Bearing clearance:	CN (normal)
Material:	standard

Similar products

ROTEX 19 ST - MatNr: 020195100800

ROTEX 19 ST hub 1.0 Ø8H7 key DIN 6885/1-JS9 > component 1a - #020195100800, torsionally flexible compact claw coupling Rotex® Standard, shaft-shaft connection, KTR

€18.38

6203-C-2HRS

Single row deep groove ball bearing 62.., radial, with steel cage and contact seals on both sides, FAG

€2.88

ROTEX 19 SINT - MatNr: 020192102400

ROTEX 19 SINT hub 1.0 Ø24H7 key DIN 6885/1-JS9 > component 1a - #020192102400, torsionally flexible compact claw coupling Rotex® Standard, shaft-shaft connection, KTR

€14.32

R150221083

Single nut with flange, FEM-E-B 25X5RX3-4, Ball screw assemblies, sealed, Rexroth

€318.21

Sold out

R065803000

Compact ball bushing KBC-30, ball bushing guides, standard material, POM ball retainer, normal radial internal clearance, without wiper seals, without grease, Rexroth

€18.75

Details

ROTEX 19 ALU - MatNr: 020196001100

ROTEX 19 ALU hub 1.0 Ø11H7 key DIN 6885/1-JS9 > component 1 - #020196001100, torsionally flexible compact claw coupling Rotex® Standard, shaft-shaft connection, KTR

€14.56

Sold out

IR35X40X20,5-EGS

Inner ring IR..-EGS for needle roller bearings, cylindrical, made of hardened rolling bearing steel, surface ground without twist, without lubrication hole, INA

€12.86

Details

DGIR15-UK

Standard rod end DGIR..-UK with pressed spherical plain bearing, sliding pair steel-PTFE, series E, female right hand thread, zinc plated, maintenance-free, Durbal

€10.96

Sold out

GCUR40

Full complement single row track roller GCUR.. with threaded stud, with profiled outer ring, eccentric, without seals, incl. lock washer and nut, Nadella

€174.12

Details

NATR17-PP-A

Yoke type track roller NATR.., single row, thick-walled outer ring with profiled surface, axial guidance via thrust washers, with inner ring and needle roller and cage assembly, three-stage sealing on both sides, INA

€38.59

DSIL15-ES

Standard rod end DSIL..-ES with pressed spherical plain bearing, sliding pair steel-steel, series E, female left hand thread, zinc plated, relubricatable, Durbal

€9.56

Sold out

R065813030

Compact ball bushing KBC-30-D-NR, ball bushing guides, stainless material, POM ball retainer, normal radial internal clearance, wiper seal on one side, without grease, Rexroth

€43.82

Details

PWKRE40-2RS-XL

Stud type track roller PWKRE.., solid roller pin with eccentric collar, thick-walled outer ring with centre rib and profiled outer surface, with axial guidance, full complement double-row cylindrical roller set, lip seals on both sides, INA

€79.26

LRE8

Adjusting nut LRE.., spring nuts for precise adjustment, balanced radial locking, clamping system with two clamping screws on two spring-loaded threaded surfaces, grooves: 4x90°, Sfero-Nadella

€111.75

Sold out

R067225440

Super linear bushing KBB-25-DD-RT without misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, with two integrated wiper seals, Rexroth

€53.11

Details