3204-BD-XL-TVH

€21.13

Ready for dispatch within 3-5 working days: 61

Product number: 1040674

Manufacturer: FAG

EAN: 4012802474701

Weight: 0.15 kg

Product information "3204-BD-XL-TVH"

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, open design with plastic cage, FAG

Bore diameter:	20
Outer diameter:	47
Width:	20,6
Cage:	polyamide, hard fabric
Bearing clearance:	CN (normal)
Material:	standard

Similar products

NCF2204-V-C3

Single row cylindrical roller bearing, support bearing, two fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, full complement rolling element, IDC

€45.25

GE20-XL-KLL-B

Radial insert ball bearing GE.., spherical outside surface of the outer ring, with eccentric locking collar for mounting on shaft, compensating for misalignment, labyrinth seals on both sides, with steel cage, relubricatable, INA

€23.94

RPNA30/47-XL

Adjusting needle roller bearing RPNA.., without inner ring, single row, outer ring with spherical outside surface in outer sleeve with plastic back-up rings to compensate for misalignment, INA

€34.77

PWKRE47-2RS

Track roller with solid roller stud and eccentric collar, with profiled outer ring (contact optimized surface), with hexagon socket, full complement cylinderical riller set, seals on both sides, IDC

€81.01

Sold out

GCUL47

Full complement single row track roller GCUL.. with threaded stud, with cylindrical outer ring, concentric, without seals, incl. lock washer and nut, Nadella

€164.27

Details

NUTR1747-A

Yoke type track roller NUTR.., with profiled outer ring (contact optimized surface), inner ring and flange rings, full complement roller set, labyrinth seals on both sides, INA

€47.19

Sold out

UC204-G2

Bearing insert for bearing units, spherical outer ring, fixing by socket set screw, shielded on both sides, SNR

€8.81

Details

Sold out

R067023074

Super linear bushing KBA-30-DD-G with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, with grease, with wiper seal on one side, Rexroth

€15.45

Details

Sold out

NAO30X47X18-XL

Single row needle roller bearing NAO.., radial needle roller bearings, non-locating, without ribs on outer ring, with inner ring, non-self-retaining, steel cage, open, INA

€52.86

Details

CLK200 19x47

High-quality internal clamping set CLK200, backlash-free shaft-hub connection, non-self-centering design: radial standard height - axial short width, mounting without axial hub displacement, for medium to high torques, CMT Line

€15.78

Sold out

R063103000

Standard linear bushing KBM-O-30-D, linear bushings, open robust all-metal design, hardened and ground sleeve, with locating hole for axial and radial securing, steel guide cage, with wiper seal on one side, ungreased, Rexroth

€55.10

Details

16005-A

Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, open design with sheet steel cage, not greased, FAG

€6.89

CSK20-PP - UKCC20-ZZ

Sprag type freewheel UKCC.., ball bearing freewheels, dimensions according to ball bearing 62.., self-centering, keyways on the inner and outer ring, shielded on both sides, operating temperature -10°C to +60°C, CTS

€37.74

Sold out

R073103000

Super linear bushing KBSH-O-30 for very high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, without wiper seals, Rexroth

€158.02

Details

KRV47-X-PP-A-NMT

Stud type track roller KRV..X without eccentric, outer ring with cylindrical profile, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA

€77.50