6007-C-2HRS-C3

€5.44

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1077990

Manufacturer: FAG

Weight: 0.16 kg

Product information "6007-C-2HRS-C3"

Single row deep groove ball bearing 60.., radial, with steel cage and contact seals on both sides, FAG

Bore diameter:	35
Outer diameter:	62
Width:	14
Sealing:	seals on both sides
Cage:	steel cage
Bearing clearance:	C3 (slightly increased)
Material:	standard

Similar products

Sold out

RKYR62-V

Guide roller RKYR.. with tapered roller bearing, with threaded stud, convex raceway side, radius R = 400, eccentric, with Viton seals (up to 120°C), incl. lock washers and nuts, Nadella

€265.81

Details

NJ305-E-XL-M1

Single row cylindrical roller bearing NJ3.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with two-piece roller guided brass cage, FAG

€61.03

Sold out

KB40-PP-RROC-AS

Corrosion-resistant linear ball bearing KB.. for shaft guidance systems, machined range, closed design, outer ring hardened and ground, high-precision guidance in plastic cage, seals on both sides, relubricatable, INA

€84.85

Details

3206-BD-XL-2Z-TVH

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, with plastic cage, steel shields on both sides, FAG

€30.35

NATR30-PP-A

Yoke type track roller NATR.., single row, thick-walled outer ring with profiled surface, axial guidance via thrust washers, with inner ring and needle roller and cage assembly, three-stage sealing on both sides, INA

€57.24

PAW38-P200 - 1000x

Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€4,145.51

6305-C-2Z-C3

Single row deep groove ball bearing 63.., radial, with steel cage and sheet steel shields on both sides, FAG

€5.12

206-XL-KRR

Deep groove ball bearing 2..-KRR, radial insert ball bearing with cylindrical outside surface of the outer ring, width inner ring with cylindrical bore for fit, sealed on both sides, with plastic cage, INA

€19.05

RNA3030

Full complement needle roller bearing RNA3.., solid and through-hardened outer ring, without inner ring (for combination with inner rings BI.., BIC.., BICG..), with lubrication hole and groove, Nadella

€133.03

Sold out

QJ305-XL-MPA-C3

Four-point contact bearing QJ3.., radial ball bearings, single row, non self-retaining, solid outer ring without retaining grooves, split inner ring, with brass cage, open design, FAG

€45.33

Details

NATR30

Yoke type track roller with profiled outer ring (contact optimized surface), with inner ring and needle cage, without seals, IDC

€40.83

6305-C-C3>V

Single row deep groove ball bearing 63.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG

€4.46

7206-B-XL-MP

Angular contact ball bearing 72..-B-MP, single-row, contact angle α = 40°, with solid brass cage, open - without seals, not greased, FAG

€29.69

Sold out

R073114040

Super linear bushing KBSH-O-40-D for very high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with wiper seal on one side, Rexroth

€227.05

Details

Sold out

22206-EA-K-B33

Spherical roller bearing, double row, tapered bore, groove and lubrication holes on outer ring, main dimensions to DIN 635-2, NRB

€22.94

Details