R073114040
Product information "R073114040"
| Bore diameter: | 40 |
|---|---|
| Outer diameter: | 62 |
| Lenght: | 80 |
| Material: | standard |
Similar products
Product number:
1114079
Manufacturer:
Rexroth
Weight:
0.863 kg
Super linear bushing KBSH-O-40-D for very high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with wiper seal on one side, Rexroth
Skip product gallery
Sold out
QJ206-XL-N2-MPA-T42B
Regular price:
€51.46
Four-point contact bearing QJ2.., radial ball bearings, single row, non self-retaining, solid outer ring with retaining grooves, split inner ring, with brass cage, open design, FAG
Sold out
NUP206-E-XL-M1
Regular price:
€68.38
Single row cylindrical roller bearing NUP2.., locating bearing, two locating ribs on outer ring, inner ring with locating rib and rib washer, cylindrical bore, open, non-greased, with two-piece roller guided brass cage, FAG
Sold out
7305-B-XL-TVP-P5
Regular price:
€47.54
Angular contact ball bearing 73..-B-TVP, single-row, contact angle α = 40°, with solid polyamide cage, open - without seals, not greased, FAG
Sold out
NU206-E-XL-K-TVP2
Regular price:
€22.97
Single row cylindrical roller bearing NU2.., non-locating bearing, two locating ribs on outer ring, inner ring without ribs with tapered bore, open, non-greased, separable, with plastic cage, FAG
FKN6206-2RS - CKN30-2RS
Regular price:
€78.26
Sprag type freewheel CKN.., ball bearing freewheels, dimensions according to ball bearing 62.., self-centering, one keyway on the inner ring, water protection seals on both sides, CTS
S206 - CB206
Built-in sprag freewheel CB2.., not self-centering (non bearing supported), one keyway on outer ring, CTS
Price on request
Sold out
RNAO50X62X20-XL
Regular price:
€40.27
Single row needle roller bearing RNAO.., radial needle roller bearings, non-locating, without ribs on outer ring, without inner ring, non-self-retaining, steel cage, open, INA
Sold out
FGU3062-MM
Regular price:
€257.37
Full complement single row track roller FGU.. without pin, light series, with optimized profiled outer ring, non-separable, metal shielded, Nadella
Sold out
GCRL62-EEM-SW
Full complement single row track roller GCRL.. with threaded stud, with optimized cylindrical outer ring, eccentric, metal shielded, incl. lock washer and nut, Nadella
Price on request
Sold out
FKY62-C-NX
Regular price:
€631.52
Corrosion-resistant guide roller FKY.. with tapered roller bearing, convex raceway sides, inner ring with holes for fixing on the shaft, with NBR seals type RS on both sides, Nadella