61802-2RSR-HLC

€8.16

Ready for dispatch within 3-5 working days: 252

Product number: 1041656

Manufacturer: FAG

EAN: 4012802337181

Weight: 0.01 kg

Product information "61802-2RSR-HLC"

Single row deep groove ball bearing 18.., radial, with steel cage and contact seals on both sides, FAG

Bore diameter:	15
Outer diameter:	24
Width:	5
Sealing:	seals on both sides
Cage:	steel cage
Bearing clearance:	CN (normal)
Material:	standard

Similar products

Sold out

R065805956

Compact ball bushing KBC-16, ball bushing guides, standard material, POM ball retainer, normal radial internal clearance, without wiper seals, without grease, Rexroth

€11.56

Details

R065811640

Compact ball bushing KBC-16-D, ball bushing guides, standard material, POM ball retainer, normal radial internal clearance, wiper seal on one side, without grease, Rexroth

€12.46

Sold out

R065821676

Compact ball bushing KBC-16-DD, ball bushing guides, standard material, POM ball retainer, normal radial internal clearance, wiper seals integrated on both sides, without grease, Rexroth

€12.96

Details

DSAL08-T/K

Standard rod end DSAL..-T/K with pressed spherical plain bearing, sliding pair steel-PTFE, series K, male left hand thread, zinc plated, maintenance-free, Durbal

€6.29

PAW12-P10 - 1x

Thrust washer PAW.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

Price on request

DSAL08-E

Standard rod end DSAL..-ES with pressed spherical plain bearing, sliding pair steel-steel, series E, male left hand thread, zinc plated, relubricatable, Durbal

€5.98

PAW12-P180 - 2500x

Thrust washer PAW.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€2,469.19

BRF08-00-502

Heavy-duty rod end BRF.. with integral self-aligning roller bearing, series K, female left hand thread, cage design, galvanized, with shields on both sides, relubricatable, Durbal

€41.03

PAW12-P200 - 100x

Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€173.59

Sold out

WLK08-60-500

Heavy-duty spherical bearing WLK.. with integral self-aligning ball bearing, full complement design, stainless steel, with long-term greasing and shields on both sides, Durbal

€122.84

Details

BEF08-60-502

Heavy-duty rod end BEF.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series K, female left hand thread, maintenance-free, Durbal

€26.81

BEFN08-80-502

Heavy-duty rod end BEFN.. in stainless steel, with pressed spherical-plain bearing, sliding pair steel-brass, series K, female left hand thread, relubricatable, Durbal

€28.85

NATV8

Yoke type track roller with profiled outer ring (contact optimized surface), with inner ring, full complement needle set, without seals, IDC

€14.36

KH16-B

Linear ball bearing KH.. for shaft guidance systems, compact range, outer ring machined, hardened, perforated, with ball and cage assembly integrated in plastic cage, without seals, relubricatable, INA

€7.73

CLK110 16x24

High-quality internal clamping set CLK110, backlash-free shaft-hub connection, self-centering design: radially flat - axially long, mounting without axial hub displacement, for medium to high torques, CMT Line

€22.14