6201-C-C3>V

Bore diameter:	12
Outer diameter:	32
Width:	10
Cage:	steel cage
Bearing clearance:	C3 (slightly increased)
Material:	standard

Sold out

FRR32-AZ

Guide roller FRR..AZ, special rollers, pin with through-hole in inner ring, two separate modified ball bearings, eccentric, with NBR seals type RS on both sides, Nadella

Price on request

Sold out

R060102010

Standard linear bushing KBM-20-D, linear bushings, closed robust all-metal design, hardened and ground sleeve, steel guide cage, with wiper seal on one side, ungreased, Rexroth

€35.35

Details

Sold out

FGL1232-SW

Full complement single row track roller FGL.. without pin, thick-walled optimized cylindrical outer ring, lubrication hole on inner ring, without seals, Nadella

€58.64

Details

Sold out

R073202000

Super linear bushing KBH-20 for high loads, with misalignment compensation, linear bushings, closed design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, without wiper seals, Rexroth

€58.80

Details

Sold out

R073112040

Super linear bushing KBSH-O-20-D for very high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with wiper seal on one side, Rexroth

€112.14

Details

Sold out

R074122530

Standard linear bushing KBMFT-25-DD-NR, tandem with square flange, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€416.91

Details

PAP2820-P10 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€232.46

Sold out

R061002000

Standard linear bushing KBM-E-20, linear bushings, closed robust all-metal design, hardened and ground sleeve, adjustable radial clearance, steel guide cage, without sealing rings, ungreased, Rexroth

€35.01

Details

PAP2830-P10 - 2500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€5,772.98

Sold out

DSIL12-T/K M12x1,25

Standard rod end DSIL..-T/K with pressed spherical plain bearing, sliding pair steel-PTFE, series K, female left hand thread, zinc plated, maintenance-free, Durbal

€8.66

Details

PAP2830-P11 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P11 with bronze backing, for dry running: contains lead, corrosion resistant, very good thermal conductivity, anti-magnetic, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€329.57

PAP2830-P200 - 100x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€417.92

Sold out

7201-B-XL-JP-UA

Angular contact ball bearing 72..-B-JP, single-row, contact angle α = 40°, with sheet steel cage, open - without seals, not greased, FAG

€23.44

Details

Sold out

BRTM16-90-502

Heavy-duty rod end BRTM.. in stainless steel, with integral self-aligning roller bearing, series K, male left hand thread, full complement design, with shields on both sides, relubricatable, Durbal

€207.11

Details

PAP2820-P180 - 5000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€9,643.73

Product information "6201-C-C3>V"