7201-B-XL-JP-UO
Product information "7201-B-XL-JP-UO"
| Bore diameter: | 12 |
|---|---|
| Outer diameter: | 32 |
| Width: | 10 |
| Cage: | steel cage |
| Material: | standard |
Similar products
Product number:
1042725
Manufacturer:
FAG
EAN:
4026677734440
Weight:
0.04 kg
Angular contact ball bearing 72..-B-JP, single-row, contact angle α = 40°, with sheet steel cage, open - without seals, not greased, FAG
Skip product gallery
FRNR32-EI
Regular price:
€135.35
Guide roller FRNR..-EI with needle roller bearing, with threaded stud, slighly convex raceway sides, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella
Sold out
RNAB11012
Full complement needle cam follower RNAB11.., with solid convex outer ring, max. slope of 1,5%, without inner ring (for combination with inner rings BI.., BIC..), Nadella
Price on request
FRNR32-EI-NX
Regular price:
€258.97
Corrosion-resistant guide roller FRNR..-EI with needle roller bearing, with threaded stud, slighly convex raceway sides, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella
Sold out
R067322045
Regular price:
€52.06
Super linear bushing KBB-O-20-VD without misalignment compensation, linear bushings, open design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with complete sealing, Rexroth
KM4
Regular price:
€2.44
Lock nut KM.., for locking of roller bearings on shafts, with four slots on the circumference for locking with lock washer MB.., metric right-hand thread, BGL
Sold out
R067302000
Regular price:
€41.36
Super linear bushing KBB-O-20 without misalignment compensation, linear bushings, open design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, without wiper seals, Rexroth
Sold out
R073312040
Regular price:
€66.02
Super linear bushing KBH-O-20-D for high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with wiper seal on one side, Rexroth
R063202000
Regular price:
€39.48
Standard linear bushing KBM-O-20-DD, linear bushings, open robust all-metal design, hardened and ground sleeve, with locating hole for axial and radial securing, steel guide cage, with two integrated wiper seals, ungreased, Rexroth
DSG16-PB
Spherical-plain bearing DSG..-PB, sliding combination steel stainless - brass , series K, relubricatable, Durbal
Price on request
Sold out
R074222530
Regular price:
€575.68
Standard linear bushing KBMM-25-DD-NR, tandem with centered square flange, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth
6201-C-2HRS-C3
Regular price:
€2.39
Single row deep groove ball bearing 62.., radial, with steel cage and contact seals on both sides, FAG
BRTF12-01-502
Regular price:
€85.31
Heavy-duty rod end BRTF.. with integral self-aligning roller bearing, series K, fine female left hand thread, cage design, galvanized, with shields on both sides, relubricatable, Durbal
PAP2830-P10 - 1x
Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®
Price on request
7201-B-XL-TVP-UA
Regular price:
€21.01
Angular contact ball bearing 72..-B-TVP, single-row, contact angle α = 40°, with solid polyamide cage, open - without seals, not greased, FAG