7209-B-XL-TVP-P5-UO

Bore diameter:	45
Outer diameter:	85
Width:	19
Cage:	polyamide, hard fabric
Material:	standard

PAP8080-P200 - 5x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€192.99

Sold out

30209-H

Tapered roller bearing 302.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG

€20.76

Details

PAP8060-P180 - 1x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€21.91

33110>A

Tapered roller bearing 331.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG

€37.38

PAP8080-P180 - 5x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€153.19

3209-BD-XL-TVH

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, open design with plastic cage, FAG

€46.02

2209-2RS-TVH

Self-aligning ball bearing 22.., double row radial ball bearings, cylindrical bore, with plastic cage, greased, seals on both sides, FAG

€34.07

LFE20

Adjusting nut LFE.., spring nuts for precise adjustment, balanced axial locking, clamping system with two clamping screws on each of two spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€249.48

Sold out

QJ209-XL-MPA-T42F

Four-point contact bearing QJ2.., radial ball bearings, single row, non self-retaining, solid outer ring without retaining grooves, split inner ring, with brass cage, open design, FAG

€65.05

Details

NUTR45

Yoke type track roller with profiled outer ring (contact optimized surface), inner ring and flange rings, full complement roller set, labyrinth seals on both sides, IDC

€71.29

NJ209-E-XL-M1-C3

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with two-piece roller guided brass cage, FAG

€84.51

R1131

Cylindrical roller bearing without inner ring, brass cage, special design, NTN

€74.89

Sold out

NJ209-E-XL-JP1-C3

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with steel cage, FAG

€52.19

Details

Sold out

FG4585-EE-SW

Full complement single row track roller FG.. without pin, thick-walled profiled outer ring with optimized radius, lubrication hole on inner ring, with plastic seals, Nadella

€252.70

Details

GRAE45-XL-NPP-B-FA125.5

Corrosion-resistant radial insert ball bearing GRAE.., spherical outside surface of the outer ring, with eccentric locking collar for mounting on shaft, compensating for misalignment, sealed on both sides, with plastic cage, relubricatable, INA

€44.90

Product information "7209-B-XL-TVP-P5-UO"