BBE50
Product information "BBE50"
| Bore diameter: | 50 |
|---|---|
| Outer diameter: | 75 |
| Lenght: | 100 |
| Cage: | polyamide, hard fabric |
| Material: | standard |
Similar products
Product number:
1066116
Manufacturer:
SNR
Weight:
1.25 kg
Closed standard ball bushing (linear ball bearing), standard, plastic cage, without seals, SNR
Skip product gallery
PAP7040-P10 - 100x
Regular price:
€1,340.20
Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®
6009-2Z-C3
Regular price:
€7.87
Single row deep groove ball bearing 60.., radial, with steel cage and sheet steel shields on both sides, FAG
DGE50-LO
Regular price:
€20.55
Radial spherical-plain bearing DGE..-LO, sliding combination steel-steel, series W, phosphated, outer ring with single split, relubricatable, Durbal
Sold out
R067025740
Regular price:
€151.99
Super linear bushing KBA-50-DD-RT with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with two integrated wiper seals, Rexroth
B7009-E-T-P4S-UL
Regular price:
€142.72
Super precision angular contact ball bearing B70..-E (spindle bearing), adjusted, contact angle α = 25°, restricted tolerances, open - without seals, universally combinable, FAG
PAP7040-P20 - 1x
Regular price:
€13.95
Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P20 with steel backing, for grease or liquid-lubricated applications: contains lead, with oil distributing pockets, ready to install, lifetime lubrication possible, low wear, low sensitivity to edge loading, good damping characteristics, insensitive to impact loads, good chemical resistance, KS Permaglide®
6009-C3
Regular price:
€6.84
Single row deep groove ball bearing 60.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG
CLK200 42x75
Regular price:
€21.64
High-quality internal clamping set CLK200, backlash-free shaft-hub connection, non-self-centering design: radial standard height - axial short width, mounting without axial hub displacement, for medium to high torques, CMT Line
CLK500 32x75
Regular price:
€45.40
Rigid shaft coupling CLK500, backlash-free, bending and torsionally stiff shaft-to-shaft connection, self-centering design, mounting without axial hub displacement, for medium to high torques, CMT Line
PAP7050-P11 - 500x
Regular price:
€19,067.98
Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P11 with bronze backing, for dry running: contains lead, corrosion resistant, very good thermal conductivity, anti-magnetic, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®
Sold out
ZKLN4075-2Z-XL
Regular price:
€490.92
Double row axial angular contact ball bearing, precision bearings for screw mounting, without fixing holes, gap seals on both sides, INA
Sold out
R073215040
Regular price:
€199.92
Super linear bushing KBH-50-D for high loads, with misalignment compensation, linear bushings, closed design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with wiper seal on one side, Rexroth
Sold out
KMFE11x1,5
Regular price:
€33.31
Lockable precision lock nut KMFE.., for locking of machine components on shafts, with four slots on the circumference and integrated radial locking element, metric right-hand thread, BGL
Sold out
R067125040
Regular price:
€150.48
Super linear bushing KBA-O-50-DD with misalignment compensation, linear bushings, open design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with two integrated wiper seals, Rexroth