CLK131 28x55

Bore diameter:	28
Outer diameter:	55
Width:	42
Thread size:	M6
T (Nm):	450
F (kN):	33
Material:	standard

ULV35-2720

Floating bearing rail ULV35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€663.98

Sold out

EM06-60-502

Heavy-duty rod end EM.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series E/EH, male left hand thread, maintenance-free, Durbal

€30.07

Details

ULV35-0880

Floating bearing rail ULV35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€224.73

Sold out

NSW35-Y-4-2RS-A

NSW-Slider, Compact Rail, robust design, electrolytically galvanized and passivated steel body (Rollon Aloy), with four prismatic roller bearings -2RS sealed in configuration A, wipers on both ends, for use in T- and U-rails, Rollon

€452.64

Details

Sold out

EFN06-20-502

Heavy-duty rod end EFN.. with pressed spherical-plain bearing, sliding pair steel-steel, series E/EH, female left hand thread, zinc plated, relubricatable, Durbal

€15.44

Details

Sold out

RKU55-V

Guide roller RKU.. with tapered roller bearing, locating roller, convex raceway side, radius R = 400, concentric, with Viton-seals (up to 120°C), incl. lock washers and nuts, Nadella

€210.77

Details

ULC35-0320

Floating bearing rail ULC35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, C-fixing holes (for screws with low head) set as standard, Rollon

€81.84

Sold out

NSW35-Y-6-2RS-A

NSW-Slider, Compact Rail, robust design, electrolytically galvanized and passivated steel body (Rollon Aloy), with six prismatic roller bearings -2RS sealed in configuration A, wipers on both ends, for use in T- and U-rails, Rollon

€661.75

Details

Sold out

LRE13

Adjusting nut LRE.., spring nuts for precise adjustment, balanced radial locking, clamping system with two clamping screws on two spring-loaded threaded surfaces, grooves: 4x90°, Sfero-Nadella

€142.61

Details

Sold out

GR6-200

Single guide rail GR6.., cross roller guides, made of alloyed special steel, through-hardened, 90° V-profile, running surfaces precision ground, fixing holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€116.42

Details

ULC35-0960

Floating bearing rail ULC35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, C-fixing holes (for screws with low head) set as standard, Rollon

€244.92

Sold out

NSD35-N-3-2RS-B

NSD-Slider, Compact Rail, robust design with nickel-plated steel body, for mounting parallel to the load direction - configuration B, with three prismatic roller bearings -2RS sealed, wipers on both ends, for use in T- and U-rails, Rollon

€402.13

Details

Sold out

GR6-600

Single guide rail GR6.., cross roller guides, made of alloyed special steel, through-hardened, 90° V-profile, running surfaces precision ground, fixing holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€335.68

Details

ULC35-1600

Floating bearing rail ULC35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, C-fixing holes (for screws with low head) set as standard, Rollon

€407.69

NSDA35-3-2Z-A

NSDA-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration A, with three crowned roller bearings -2Z shielded, for use in K-rails, Rollon

€201.27

Ringfeder - TI 9013 B
Bikon - Bikon 7000 B
Tollok - TLK 131
KTR - KTR 201
Ringspann - RLK 131

Product information "CLK131 28x55"