GR6-200

Design:	GR
Size:	6
Width:	15
Height:	13,9
Lenght:	200
Thread size:	M6
Material:	standard

Sold out

C3RAL35.10.115

Carriage C3RAL.., anodized aluminum body with mounting holes (thread), three RAL.. guide rollers with ball bearings, suitable for LM.. guide rails, Nadella

€232.80

Details

ULV35-2560

Floating bearing rail ULV35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€624.95

Sold out

GR9-900

Single guide rail GR9.., cross roller guides, made of alloyed special steel, through-hardened, 90° V-profile, running surfaces precision ground, fixing holes with 50mm start and end distances and 100mm intermediate distances, Rosa Sistemi

€511.97

Details

CPN43-2Z

Roller with pin CPN.., concentric, prismatic surface, suitable for sliders CS.., CD.., NS.., ND.. of the Compact Rail, for use on T- and U-rails, lubricated for life, steel shielded on both sides, Rollon

€35.13

Sold out

NSW35-6-2RS-B

NSW-Slider, Compact Rail, robust design made of zinc plated steel, with six prismatic roller bearings -2RS sealed in configuration B, wipers on both ends, for use in T- and U-rails, Rollon

€367.69

Details

GR6-400-D-AA6-23

Linear unit GR6..-AA6.., cross roller guideways, two 400mm long guide rails and roller cage made of steel sheet with 23 cylindrical rollers, fixing holes with 25mm start and end spacing and 50mm intermediate spacing, Rosa Sistemi

€413.60

ULC35-0800

Floating bearing rail ULC35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, C-fixing holes (for screws with low head) set as standard, Rollon

€204.22

NSDA35-3-2RS-B

NSDA-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration B, with three crowned roller bearings -2RS sealed, wipers on both ends, for use in K-rails, Rollon

€223.57

DPHS06

Standard rod end DPHS.. with pressed spherical plain bearing, sliding pair steel-brass, series K, female right hand thread, zinc plated, relubricatable, Durbal

€5.40

GR6-850-D-AA6-49

Linear unit GR6..-AA6.., cross roller guideways, two 850mm long guide rails and roller cage made of steel sheet with 49 cylindrical rollers, fixing holes with 25mm start and end spacing and 50mm intermediate spacing, Rosa Sistemi

€912.12

ULC35-2080

Floating bearing rail ULC35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, C-fixing holes (for screws with low head) set as standard, Rollon

€516.56

NSDA35-5-2RS-B

NSDA-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration B, with five crowned roller bearings -2RS sealed, wipers on both ends, for use in K-rails, Rollon

€342.08

BEF06-20-501

Heavy-duty rod end BEF.. with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series K, female right hand thread, galvanized, maintenance-free, Durbal

€15.09

M6-250

Single slide rail M6.., linear sliding guideways, made of special alloy steel, 90° M-profile, running surfaces coated with antifriction material, mounting holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€210.98

ULC35-3360

Floating bearing rail ULC35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, C-fixing holes (for screws with low head) set as standard, Rollon

€811.38

Product information "GR6-200"