CLK132 19x47

€14.78

Ready for dispatch within 3-5 working days: 69

Average lead time from new production (poss. with MOQ) in working days: 40-60

Product number: 1065835

Manufacturer: CMT Line

Weight: 0.3 kg

Product information "CLK132 19x47"

High-quality internal clamping set CLK132, backlash-free shaft-hub connection, self-centering design: radial standard height - short axial width, mounting with axial hub displacement, for high torques, for medium to high torques, CMT Line

Bore diameter:	19
Outer diameter:	47
Width:	28
Thread size:	M6
T (Nm):	390
F (kN):	41
Material:	standard

Alternative articles to "CLK132 19x47"*

Ringfeder - RfN 7013.0
Bikon - Bikon 1003
Tollok - TLK 132
KTR - KTR 203
Ringspann - RLK 132

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

ULC35-2160

Floating bearing rail ULC35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, C-fixing holes (for screws with low head) set as standard, Rollon

€527.41

Sold out

FGUL1747

Full complement single row track roller FGUL.. without pin, heavy series, with extra thick-walled cylindrical outer ring, non-separable, without seals, Nadella

Price on request

CLK130 32x60

High-quality internal clamping set CLK130, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting with axial hub displacement, for high torques, CMT Line

€23.28

PWTR20-2RS-XL

Yoke type track roller PWTR.., with profiled outer ring (contact optimized surface), with center rib and full complement double-row cylindrical roller set, with axial guidance, full complement roller set, protected lip seals on both sides, INA

€49.44

Sold out

NSW35-Y-4-2RS-A

NSW-Slider, Compact Rail, robust design, electrolytically galvanized and passivated steel body (Rollon Aloy), with four prismatic roller bearings -2RS sealed in configuration A, wipers on both ends, for use in T- and U-rails, Rollon

€452.64

Details

ULC35-3440

€824.45

Sold out

GR6-600

Single guide rail GR6.., cross roller guides, made of alloyed special steel, through-hardened, 90° V-profile, running surfaces precision ground, fixing holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€335.68

Details

CLK131 28x55

High-quality internal clamping set CLK131, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting without axial hub displacement, for high torques, CMT Line

€18.40

KR16-SK-PP-A-NMT

Stud type track roller KR.. without eccentric, outer ring profile optimized, solid roller pin, needles cage-guided, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA

€34.73

Sold out

NSD35-N-3-2RS-B

NSD-Slider, Compact Rail, robust design with nickel-plated steel body, for mounting parallel to the load direction - configuration B, with three prismatic roller bearings -2RS sealed, wipers on both ends, for use in T- and U-rails, Rollon

€402.13

Details

R060103010

Standard linear bushing KBM-30-D, linear bushings, closed robust all-metal design, hardened and ground sleeve, steel guide cage, with wiper seal on one side, ungreased, Rexroth

€52.19

Sold out

NSD35-5-2Z-B

NSD-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration B, with five prismatic roller bearings -2Z shielded, for use in T- and U-rails, Rollon

€305.90

Details

GR6-100-D-AA6-5

Linear unit GR6..-AA6.., cross roller guideways, two 100mm long guide rails and roller cage made of steel sheet with 5 cylindrical rollers, fixing holes with 25mm start and end spacing and 50mm intermediate spacing, Rosa Sistemi

€148.25

CLK133 40x65

High-quality internal clamping set CLK133, backlash-free shaft-hub connection, self-centering design: radial standard height - short axial width, mounting without axial hub displacement, for medium to high torques, CMT Line

€20.26

KRV47-PP-A-NMT

Stud type track roller KRV.. without eccentric, outer ring profile optimized, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA

€70.42