CLK139 18x40

€24.80

Ready for dispatch within 3-5 working days: 239

Average lead time from new production (poss. with MOQ) in working days: 40-60

Product number: 1066555

Manufacturer: CMT Line

Weight: 0.2 kg

Product information "CLK139 18x40"

High-quality internal clamping set CLK139, backlash-free shaft-hub connection, self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

Bore diameter:	18
Outer diameter:	40
Width:	18
Thread size:	M6
T (Nm):	180
F (kN):	24
Material:	standard

Alternative articles to "CLK139 18x40"*

Ringfeder - TI 9009 - 7008
Bikon - Bikon 4500
Tollok - TLK 139

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

KH3050-LL-3AS

Compact linear ball bearing (ball sleeve), wiper seals on both sides, relubrication facility, NTN

€12.90

RNA2203-2RSR

Yoke type track roller RNA22.., needle roller bearings, single row, thick-walled outer ring with profiled outside surface, without inner ring, with needle roller and cage assembly (steel cage), without axial guidance, lip seals on both sides, INA

€27.05

NSW35-6-2Z-A

NSW-Slider, Compact Rail, robust design made of zinc plated steel, with six prismatic roller bearings -2Z shielded in configuration A, wipers on both ends, for use in T- and U-rails, Rollon

€324.09

Sold out

R063202505

Standard linear bushing KBM-O-25-VD, linear bushings, open robust all-metal design, hardened and ground sleeve, with locating hole for axial and radial securing, steel guide cage, with complete sealing, ungreased, Rexroth

€62.17

Details

Sold out

GR6-850

Single guide rail GR6.., cross roller guides, made of alloyed special steel, through-hardened, 90° V-profile, running surfaces precision ground, fixing holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€483.26

Details

CLK200 20x47

High-quality internal clamping set CLK200, backlash-free shaft-hub connection, non-self-centering design: radial standard height - axial short width, mounting without axial hub displacement, for medium to high torques, CMT Line

€15.78

KR40-PP-A-NMT

Stud type track roller KR.. without eccentric, outer ring profile optimized, solid roller pin, needles cage-guided, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA

€54.11

NSDA43-5-2Z-A

NSDA-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration A, with five crowned roller bearings -2Z shielded, for use in K-rails, Rollon

€340.81

ULC35-0320

Floating bearing rail ULC35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, C-fixing holes (for screws with low head) set as standard, Rollon

€81.84

GR6-700-D-AA6-40

Linear unit GR6..-AA6.., cross roller guideways, two 700mm long guide rails and roller cage made of steel sheet with 40 cylindrical rollers, fixing holes with 25mm start and end spacing and 50mm intermediate spacing, Rosa Sistemi

€712.11

CLK110 19x27

High-quality internal clamping set CLK110, backlash-free shaft-hub connection, self-centering design: radially flat - axially long, mounting without axial hub displacement, for medium to high torques, CMT Line

€22.88

KRV40-PP-A

Stud type track roller KRV.. without eccentric, outer ring profile optimized, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, INA

€54.11

NSDA43-3-2RS-A

NSDA-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration A, with three crowned roller bearings -2RS sealed, wipers on both ends, for use in K-rails, Rollon

€264.96

ULC35-1600

€407.69

V6-500

Single slide rail V6.., linear sliding guideways, made of special alloy steel, 90° V-profile, smooth running surfaces without antifriction material, mounting holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€466.40