CLK139 80x115

€80.40

Ready for dispatch within 3-5 working days: 29

Average lead time from new production (poss. with MOQ) in working days: 40-60

Product number: 1066574

Manufacturer: CMT Line

Weight: 1.7 kg

Product information "CLK139 80x115"

High-quality internal clamping set CLK139, backlash-free shaft-hub connection, self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

Bore diameter:	80
Outer diameter:	115
Width:	35
Thread size:	M10
T (Nm):	4700
F (kN):	150
Material:	standard

Alternative articles to "CLK139 80x115"*

Ringfeder - TI 9009 - 7008
Bikon - Bikon 4500
Tollok - TLK 139

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

Sold out

DCSL16-M10

Angle joint DCSL.., similar to DIN 71802, form CS, with clip locking, steel, surface galvanized, with left hand thread, Durbal

€5.52

Details

61818-Y-C3

Single row deep groove ball bearing 618.., radial contact, with brass cage, open and not greased, FAG

€71.69

Sold out

BRTM12-90-501

Heavy-duty rod end BRTM.. in stainless steel, with integral self-aligning roller bearing, series K, male right hand thread, full complement design, with shields on both sides, relubricatable, Durbal

€194.93

Details

Sold out

BRTF10-90-501

Heavy-duty rod end BRTF.. in stainless steel, with integral self-aligning roller bearing, series K, female right hand thread, full complement design, with shields on both sides, relubricatable, Durbal

€194.93

Details

Sold out

ZARN55115-TV-A

Needle roller axial cylindrical roller bearing ZARN, combined axial radial high-precision bearings for screw drives, light series, double direction, without locating holes, INA

€1,200.59

Details

GC27-40

Linear housing made of aluminum, compact design, single, closed, without linear ball bearing, can be combined with linear bearings KH or LBBR, CMT Line

€38.96

Sold out

33015-H

Tapered roller bearing 330.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG

€59.34

Details

Sold out

NU1015-XL-M1A-C3

Single row cylindrical roller bearing NU1.., non-locating bearing, two locating ribs on outer ring, inner ring without ribs with cylindrical bore, open, non-greased, separable, with outer ring rib-guided two-piece brass cage, FAG

€135.36

Details

C208-R-ZZ

Profiled guide roller C..-ZZ with pin, double row bearing, concentric, steel shields on both sides, incl. lock washer and nuts, CTS

€27.32

Sold out

GR12-600

Single guide rail GR12.., cross roller guides, made of alloyed special steel, through-hardened, 90° V-profile, running surfaces precision ground, fixing holes with 50mm start and end distances and 100mm intermediate distances, Rosa Sistemi

€490.55

Details

Sold out

ESPA205

Self aligning bearing unit with radial insert ball bearing ES2.. with eccentric locking collar and shielded on both sides, pillow block PA2.. made of cast, SNR

€19.40

Details

GR12-600-D-AA12-19

Linear unit GR12..-AA12.., cross roller guideways, two 600mm long guide rails and roller cage made of steel sheet with 19 cylindrical rollers, fixing holes with 50mm start and end spacing and 100mm intermediate spacing, Rosa Sistemi

€944.79

Sold out

PA205

Pillow block without insert, series PA2.., made of quality cast iron, passivated painted surface, SNR

€10.14

Details

GR12-1000-D-AA12-31

Linear unit GR12..-AA12.., cross roller guideways, two 1000mm long guide rails and roller cage made of steel sheet with 31 cylindrical rollers, fixing holes with 50mm start and end spacing and 100mm intermediate spacing, Rosa Sistemi

€1,606.35

Sold out

USPA205

Self aligning bearing unit with radial insert ball bearing US2.. with socket set screws and shielded on both sides, pillow block PA2.. made of cast, SNR

€20.29

Details