CLK250 48x60

€19.60

Ready for dispatch within 3-5 working days: 27

Average lead time from new production (poss. with MOQ) in working days: 40-60

Product number: 1066522

Manufacturer: CMT Line

Weight: 0.36 kg

Product information "CLK250 48x60"

High-quality internal clamping set CLK250, backlash-free shaft-hub connection, non-self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

Bore diameter:	48
Outer diameter:	60
Width:	10
Lenght:	25
T (Nm):	525
F (kN):	22
Material:	standard

Alternative articles to "CLK250 48x60"*

Bikon - Bikon 5500 SP
Tollok - TLK 250
KTR - KTR 125
Ringspann - RLK 250

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

BEF25-20-501

Heavy-duty rod end BEF.. with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series K, female right hand thread, galvanized, maintenance-free, Durbal

€74.71

CLK400 35x60

High-quality internal clamping set CLK400, backlash-free shaft-hub connection, self-centering design: radial standard height - axially long, mounting without axial hub displacement, for very high torques, CMT Line

€54.40

CLK350 35x60

High-quality internal clamping set CLK350, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting with axial hub displacement, for low to medium torques, CMT Line

€33.14

Sold out

ZKLF1560-2Z-XL

Double row axial angular contact ball bearing, precision bearings for screw mounting, with fixing holes, gap seals on both sides, INA

€320.29

Details

K55X60X27-B/0-7

Needle roller cage assembly K.., radial needle roller bearings for direct bearing arrangement, DIN 5405-1/ISO 3030, single-row design, cage made of sheet steel, open, INA

€15.92

52306

Axial deep groove ball bearing 523.., double direction based on two ball and cage assemblies, two flat housing locating washers (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€60.95

PAP5540-P10 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€6,130.80

PAP5540-P200 - 50x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€498.54

PAP5540-P180 - 1x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€8.79

DPHSL25

Standard rod end DPHSL.. with pressed spherical plain bearing, sliding pair steel-brass, series K, female left hand thread, zinc plated, relubricatable, Durbal

€32.98

Sold out

BEFN25-80-502

Heavy-duty rod end BEFN.. in stainless steel, with pressed spherical-plain bearing, sliding pair steel-brass, series K, female left hand thread, relubricatable, Durbal

€150.17

Details

CLK400 32x60

€54.40

Sold out

PFVR60

Ball bearing guide roller PFVR.., version with 120° running groove, flat raceway side, eccentric, with NBR seals type RS on both sides, incl. lock washer and nut, Nadella

€113.59

Details

IR50X60X20-IS1-XL

Inner ring IR..-IS for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, with lubrication hole, INA

€14.39

LS4060

Bearing washer LS.., axial bearing washers, can be used as housing or shaft washer, suitable for needle roller and cage assemblies AXK.. and cylindrical roller and cage assemblies K811.., raceways hardened and ground, INA

€5.08