CLK400 38x65

€65.60

Ready for dispatch within 3-5 working days: 105

Average lead time from new production (poss. with MOQ) in working days: 40-60

Product number: 1066273

Manufacturer: CMT Line

Weight: 1.1 kg

Product information "CLK400 38x65"

High-quality internal clamping set CLK400, backlash-free shaft-hub connection, self-centering design: radial standard height - axially long, mounting without axial hub displacement, for very high torques, CMT Line

Bore diameter:	38
Outer diameter:	65
Width:	45
Thread size:	M6
T (Nm):	1880
F (kN):	100
Material:	standard

Alternative articles to "CLK400 38x65"*

Ringfeder - RfN 7005
Bikon - Bikon 1012
Tollok - TLK 400 - 450
KTR - KTR 400
Ringspann - RLK 402

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

PAP6070-P180 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€19,040.19

Sold out

C3RCL35.10.115-NX

Carriage C3RCL.., anodized aluminum body with mounting holes (thread), three corrosion-resistant RCL.. guide rollers with ball bearings, suitable for LM.. guide rails, Nadella

€411.23

Details

Sold out

NSW35-Y-4-2RS-A

NSW-Slider, Compact Rail, robust design, electrolytically galvanized and passivated steel body (Rollon Aloy), with four prismatic roller bearings -2RS sealed in configuration A, wipers on both ends, for use in T- and U-rails, Rollon

€452.64

Details

DPOSL06

Standard rod end DPOSL.. with pressed spherical plain bearing, sliding pair steel-brass, series K, male left hand thread, zinc plated, relubricatable, Durbal

€5.40

Sold out

GR6-550

Single guide rail GR6.., cross roller guides, made of alloyed special steel, through-hardened, 90° V-profile, running surfaces precision ground, fixing holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€305.18

Details

PAP6060-P180 - 2500x

€24,099.56

Sold out

NA22040

Full complement needle roller bearing NA2.., complete bearing, assembly of solid through-hardened outer ring RNA2.. with needle rollers set and BI2.. inner ring, with lubrication hole and groove, Nadella

€185.08

Details

Sold out

NSD35-N-3-2RS-B

NSD-Slider, Compact Rail, robust design with nickel-plated steel body, for mounting parallel to the load direction - configuration B, with three prismatic roller bearings -2RS sealed, wipers on both ends, for use in T- and U-rails, Rollon

€402.13

Details

BEM06-20-502

Heavy-duty rod end BEM.. with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series K, male left hand thread, galvanized, maintenance-free, Durbal

€15.09

GR6-1100-D-AA6-64

Linear unit GR6..-AA6.., cross roller guideways, two 1100mm long guide rails and roller cage made of steel sheet with 64 cylindrical rollers, fixing holes with 25mm start and end spacing and 50mm intermediate spacing, Rosa Sistemi

€1,341.22

CPA43-2RS

Roller with pin CPA.., eccentric, prismatic surface, suitable for sliders CS.., CD.., NS.., ND.. of the Compact Rail, for use on T- and U-rails, lubricated for life, 2RS sealed, Rollon

€40.57

NSDA43-3-2Z-B

NSDA-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration B, with three crowned roller bearings -2Z shielded, for use in K-rails, Rollon

€224.84

BEMN06-20-502

Heavy-duty rod end BEMN.. with pressed spherical-plain bearing, sliding pair steel-brass, series K, male left hand thread, zinc plated, relubricatable, Durbal

€18.82

V6-200

Single slide rail V6.., linear sliding guideways, made of special alloy steel, 90° V-profile, smooth running surfaces without antifriction material, mounting holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€147.67

ULC35-0720

Floating bearing rail ULC35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, C-fixing holes (for screws with low head) set as standard, Rollon

€183.58