CPR53060

Bore diameter:	30
Outer diameter:	60
Height:	5
Material:	standard

DPHSL25

Standard rod end DPHSL.. with pressed spherical plain bearing, sliding pair steel-brass, series K, female left hand thread, zinc plated, relubricatable, Durbal

€32.98

Sold out

BEFN25-80-502

Heavy-duty rod end BEFN.. in stainless steel, with pressed spherical-plain bearing, sliding pair steel-brass, series K, female left hand thread, relubricatable, Durbal

€150.17

Details

Sold out

PFV60

Ball bearing guide roller PFV.., version with 120° running groove, flat raceway side, concentric, with NBR seals type RS on both sides, incl. lock washer and nut, Nadella

€113.59

Details

IR55X60X35-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€16.25

WS89306

Shaft locating washer WS893.., thrust bearing washers, internally centered, made from through-hardened rolling bearing steel, raceways precision ground, bore and outside diameter precision machined, INA

€36.78

PAP5540-P10 - 500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€3,159.98

PAP5540-P200 - 500x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€4,787.93

PAP5540-P180 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€6,365.00

PAP5540-P180 - 500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€3,280.88

DSI25-T/K

Standard rod end DSI..-T/K with pressed spherical plain bearing, sliding pair steel-PTFE, series K, female right hand thread, zinc plated, maintenance-free, Durbal

€32.98

Sold out

BEMN25-80-501

Heavy-duty rod end BEMN.. in stainless steel, with pressed spherical-plain bearing, sliding pair steel-brass, series K, male right hand thread, relubricatable, Durbal

€150.17

Details

Sold out

AX54060

Axial needle roller bearing AX.., thick series, single-row axial needle roller cage with built-in thick washer, Nadella

€29.32

Details

NKS45

Needle roller bearing NKS.., heavy series, open single row design, ribs on outer ring, without inner ring, steel cage, INA

€34.05

K81108-TV-A/0-8

Axial cylindrical roller and cage assembly K811.., axial cylindrical roller bearings, single row, single direction, for combination with axial bearing washers GS811.. and WS811.., plastic cage, INA

€18.55

PAP5540-P10 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€744.32

Product information "CPR53060"