PAP5540-P200 - 500x

€4,787.93

Average lead time from new production (poss. with MOQ) in working days: 10-30

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1123198

EAN: 4028977965890

Weight: 68.5 kg

Product information "PAP5540-P200 - 500x"

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

Bore diameter:	55
Outer diameter:	60
Lenght:	40
Material:	PERMAGLIDE® P200

Alternative articles to "PAP5540-P200 - 500x"*

PM5540DX
PG 556040 A
PCM 556040 M
EGB5540-E50
POZ 5540

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

CLK130 35x60

High-quality internal clamping set CLK130, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting with axial hub displacement, for high torques, CMT Line

€24.04

CLK350 35x60

High-quality internal clamping set CLK350, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting with axial hub displacement, for low to medium torques, CMT Line

€33.14

CLK400 35x60

High-quality internal clamping set CLK400, backlash-free shaft-hub connection, self-centering design: radial standard height - axially long, mounting without axial hub displacement, for very high torques, CMT Line

€54.40

BEM25-60-502

Heavy-duty rod end BEM.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series K, male left hand thread, maintenance-free, Durbal

€138.05

CLK200 35x60

High-quality internal clamping set CLK200, backlash-free shaft-hub connection, non-self-centering design: radial standard height - axial short width, mounting without axial hub displacement, for medium to high torques, CMT Line

€17.68

AS4060

Thrust bearing washer AS.., suitable for axial needle roller and cage assemblies AXK.., for use as a shaft or housing washer, stamped, through-hardened, polished, INA

€1.22

CLK130 32x60

€23.28

CLK200 32x60

€17.26

BEM25-60-501

Heavy-duty rod end BEM.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series K, male right hand thread, maintenance-free, Durbal

€138.05

CLK133 35x60

High-quality internal clamping set CLK133, backlash-free shaft-hub connection, self-centering design: radial standard height - short axial width, mounting without axial hub displacement, for medium to high torques, CMT Line

€18.68

AXK4060-A/0-10

Axial needle roller and cage assembly AXK.., axial roller bearings, single direction, dimensionally stable cage made from sheet steel, for direct mounting or in combination with axial bearing washers AS.., INA

€3.23

CLK133 32x60

€18.68

CLK500 30x60

Rigid shaft coupling CLK500, backlash-free, bending and torsionally stiff shaft-to-shaft connection, self-centering design, mounting without axial hub displacement, for medium to high torques, CMT Line

€34.40

51108

Axial deep groove ball bearing 511.., single direction, flat housing locating washer (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€11.83

AX4060

Axial needle roller bearing AX.., thin series, single-row axial needle roller cage with built-in thin washer, Nadella

€14.39