KH12-PP

€7.96

Ready for dispatch within 3-5 working days: 2789

Product number: 1003239

Manufacturer: INA

Weight: 0.02 kg

Product information "KH12-PP"

Linear ball bearing KH.. for shaft guidance systems, compact range, outer ring machined, hardened, perforated, with ball and cage assembly integrated in plastic cage, seals on both sides, relubricatable, INA

Bore diameter:	12
Outer diameter:	19
Lenght:	28
Sealing:	seals on both sides
Material:	standard

Similar products

NK12/16-XL

Needle roller bearing NK.., light series, open single row design, ribs on outer ring, without inner ring, steel cage, INA

€7.92

K15X19X10-A/0-7

Needle roller cage assembly K.., radial needle roller bearings for direct bearing arrangement, DIN 5405-1/ISO 3030, single-row design, cage made of sheet steel, open, INA

€3.04

RNA22/6-2RSR

Yoke type track roller RNA22.., needle roller bearings, single row, thick-walled outer ring with profiled outside surface, without inner ring, with needle roller and cage assembly (steel cage), without axial guidance, lip seals on both sides, INA

€11.85

KRV19

Stud type track roller KRV.. without eccentric, solid roller pin, with axial guidance, outer ring with crowning profile R500, full complement, gap seals on both sides, INA

€27.49

135-TVH

Self-aligning ball bearing 13.., double row radial ball bearings, cylindrical bore, open, with plastic cage, not greased, FAG

€12.90

Sold out

R065811276

Compact ball bushing KBC-12-D, ball bushing guides, standard material, POM ball retainer, normal radial internal clearance, wiper seal on one side, without grease, Rexroth

€10.91

Details

Sold out

R067021076

Super linear bushing KBA-10-DD with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, with wiper seal on one side, Rexroth

€28.70

Details

DG08-PW

Radial spherical-plain bearing DG..-PW, sliding combination steel-brass, lined with bronze-PTFE-composite, series K, maintenance-free, Durbal

€4.78

KR19-X

Track roller with solid roller stud, with cage-guided needles and cylindrical outer ring, with screw driver slot, without seals, IDC

€23.64

NATV6-PP

Yoke type track roller with profiled outer ring (contact optimized surface), with inner ring, full complement needle set, seals on both sides, IDC

€14.00

GC19-SW

Full complement single row track roller GC.. with threaded stud, profiled outer ring with optimized radius, concentric, without seals, incl. lock washer and nut, Nadella

€58.33

Sold out

KR19-EE

Cam follower KR.. with concentric pin, with cage-guided needles and convex outer ring, plastic seals on both sides, with hexagon socket, incl. clamping nut, Nadella

€47.91

Details

61800-2RSR-HLC-C3

Single row deep groove ball bearing 18.., radial, with steel cage and contact seals on both sides, FAG

€8.09

NKX10-TV-XL

Needle roller/axial ball bearing NKX.., combined axial radial bearings, without inner ring, single direction axial component with ball cage, without protective cap, INA

€28.26

RSTO6-X-TV

Yoke type track roller RSTO.., needle roller bearings, single row, thick-walled outer ring with cylindrical surface, without inner ring, with needle roller and cage assembly (polyamide cage), without axial guidance, open, not self-retaining, INA

€10.99