FRR62-EI
Product information "FRR62-EI"
| Outer diameter: | 62 |
|---|---|
| Lenght: | 80,5 |
| Thread size: | M20x1,5 |
| Material: | standard |
| 1038352 - FRR62-EU - Nadella |
Similar products
Product number:
1068378
Manufacturer:
Nadella
Weight:
0.82 kg
Guide roller FRR..-EI, special rollers, with double row ball bearing, eccentric, with NBR seals type RS on both sides, incl. lock washer and nuts, Nadella
Alternative articles to "FRR62-EI"*
* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.
Skip product gallery
Sold out
7305-B-XL-TVP-P5
Regular price:
€47.54
Angular contact ball bearing 73..-B-TVP, single-row, contact angle α = 40°, with solid polyamide cage, open - without seals, not greased, FAG
PAW38-P10 - 100x
Regular price:
€274.25
Thrust washer PAW.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®
CSK30-P - UKC30-ZZ
Regular price:
€46.51
Sprag type freewheel UKC.., ball bearing freewheels, dimensions according to ball bearing 62.., self-centering, one keyway on the inner ring, shielded on both sides, operating temperature -10°C to +60°C, CTS
Sold out
3206-BD-XL-C3
Regular price:
€33.32
Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, open design with steel cage, FAG
PAW38-P14 - 10x
Regular price:
€32.87
Thrust washer PAW.., maintenance-free plain bearing, standard material P14 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, little wear, low friction value, no tendency to fuse with metal, KS Permaglide®
NFR20 - GF20
Regular price:
€138.57
Roller type freewheel GF.., self-centering, sliding steel on steel, one keyway on the inner ring, CTS
Sold out
3305-BD-XL-2Z-C3
Regular price:
€44.72
Double row angular contact ball bearing 33.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, with steel cage and sheet steel shields on both sides, FAG
PAW38-P180 - 500x
Regular price:
€1,369.49
Thrust washer PAW.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®
Sold out
FGL3062-SW
Regular price:
€151.83
Full complement single row track roller FGL.. without pin, thick-walled optimized cylindrical outer ring, lubrication hole on inner ring, without seals, Nadella
PAW38-P200 - 1000x
Regular price:
€4,145.51
Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®
Sold out
QJ305-XL-MPA-T42A
Regular price:
€52.13
Four-point contact bearing QJ3.., radial ball bearings, single row, non self-retaining, solid outer ring without retaining grooves, split inner ring, with brass cage, open design, FAG
Sold out
GCL52-EEM-SW
Full complement single row track roller GCL.. with threaded stud, with optimized cylindrical outer ring, concentric, metal shielded, incl. lock washer and nut, Nadella
Price on request
Sold out
GCRL47-EEM-SW
Full complement single row track roller GCRL.. with threaded stud, with optimized cylindrical outer ring, eccentric, metal shielded, incl. lock washer and nut, Nadella
Price on request
Sold out
NUP206-E-XL-M1
Regular price:
€68.38
Single row cylindrical roller bearing NUP2.., locating bearing, two locating ribs on outer ring, inner ring with locating rib and rib washer, cylindrical bore, open, non-greased, with two-piece roller guided brass cage, FAG