GYE25-XL-KRR-B

€15.57

Ready for dispatch within 3-5 working days: 116

Product number: 1045958

Manufacturer: INA

EAN: 4012802783162

Weight: 0.19 kg

Product information "GYE25-XL-KRR-B"

Radial insert ball bearing GYE.., spherical outer ring surface, grub screws in inner ring for location on shaft, compensating for misalignment, sealed on both sides, with plastic cage, relubricatable, INA

Bore diameter:	25
Outer diameter:	52
Width:	34,1
Cage:	polyamide, hard fabric
Material:	standard

Similar products

RAE25-XL-NPP-NR

Radial insert ball bearing RAE.., cylindrical outer ring, with eccentric locking collar for mounting on shaft, sealed on both sides, with plastic cage, not relubricatable, INA

€17.15

NATR25-PP-A

Yoke type track roller NATR.., single row, thick-walled outer ring with profiled surface, axial guidance via thrust washers, with inner ring and needle roller and cage assembly, three-stage sealing on both sides, INA

€47.19

CLK300 45x52

High-quality internal clamping set CLK300, backlash-free shaft-hub connection, non-self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

€6.06

Sold out

PKR52-C-NX-V

Corrosion-resistant guide roller PKR.. with tapered roller bearing, track roller, eccentric, with Viton-seals (up to 120°C), incl. lock washers and nuts, Nadella

€479.28

Details

PWKR52-2RS-XL

Stud type track roller PWKR.., solid roller pin, thick-walled outer ring with centre rib and profiled outer surface, with axial guidance, full complement double-row cylindrical roller set, lip seals on both sides, INA

€88.03

Sold out

FGL2552-SW

Full complement single row track roller FGL.. without pin, thick-walled optimized cylindrical outer ring, lubrication hole on inner ring, without seals, Nadella

€87.96

Details

Sold out

R065804056

Compact ball bushing KBC-40, ball bushing guides, standard material, POM ball retainer, normal radial internal clearance, without wiper seals, without grease, Rexroth

€24.53

Details

KRE52-PP-A

Stud type track roller KRE.. with eccentric, outer ring profile optimized, solid roller pin, needles cage-guided, with axial guidance, sealing by plastic axial plain washer on both sides, INA

€87.62

FRR52-EU

Euroroller FRR..-EU, with double row angular contact ball bearing, light convex raceway side, eccentric, with NBR seals type RS on both sides, incl. lock washer and nuts, Nadella

€135.90

6205-C3

Single row deep groove ball bearing 62.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG

€3.04

Sold out

FRNR52

Special guide roller FRNR.. with needle roller bearing, raceway with O-ring, slighly convex raceway sides, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella

€449.35

Details

LR204-2RSR

Single row track roller LR2.., deep groove ball bearing based, without pin, thick-walled outer ring with crowned lateral surface of R=500mm, with plastic cage, lip seals on both sides, INA

€21.46

Sold out

RKYR52-NX-V

Corrosion-resistant guide roller RKYR.. with tapered roller bearing, with threaded stud, convex raceway side, radius R = 400, eccentric, with Viton seals (up to 120°C), incl. lock washers and nuts, Nadella

€523.64

Details

3205-BD-XL-2Z-TVH

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, with plastic cage, steel shields on both sides, FAG

€25.43

Sold out

KRE52-EE

Cam follower KRE.. with pin and eccentric collar, with cage-guided needles and convex outer ring, plastic seals on both sides, with hexagon socket, incl. clamping nut, Nadella

€118.60

Details