IR75X85X25-EGS

Bore diameter:	75
Outer diameter:	85
Width:	25
Material:	standard

B7209-C-T-P4S-UL

Super precision angular contact ball bearing B72..-C (spindle bearing), adjusted, contact angle α = 15°, restricted tolerances, open - without seals, universally combinable, FAG

€174.82

PAP8080-P10 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€2,762.66

Sold out

QJ209-XL-MPA-T42A

Four-point contact bearing QJ2.., radial ball bearings, single row, non self-retaining, solid outer ring without retaining grooves, split inner ring, with brass cage, open design, FAG

€65.05

Details

7209-B-XL-MP-UA

Angular contact ball bearing 72..-B-MP, single-row, contact angle α = 40°, with solid brass cage, open - without seals, not greased, FAG

€57.59

Sold out

US209-G2

Bearing insert US2.. for bearing units, spherical outer ring, fixing by socket set screw, shielded on both sides, SNR

€19.70

Details

PAP80100-P180 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€2,921.20

Sold out

GCR85-EEM-SW

Full complement single row track roller GCR... with threaded stud, profiled outer ring with optimized radius, eccentric, metal shielded, incl. lock washer and nut, Nadella

€470.51

Details

LR208-X-2RS

Single row track roller LR2.., deep groove ball bearing based, without pin, thick-walled outer ring with cylindrical outer surface, with plastic cage, lip seals on both sides, INA

€69.99

Sold out

SL024912-A-C3

Double row cylindrical roller bearing SL0249.. with full complement, non-locating bearing, three fixed ribs on inner ring, outer ring without ribs, locking ring between rows of rolling elements, INA

€114.08

Details

Sold out

LF20

Adjusting nut LF.., spring nuts for precise adjustment, axial locking, standard clamping system with two clamping screws on one spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€146.22

Details

PAP8055-P200 - 50x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€1,381.40

NJ209-E-XL-JP1

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with steel cage, FAG

€52.19

51112

Axial deep groove ball bearing 511.., single direction, flat housing locating washer (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€20.23

PAP8040-P200 - 2500x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€45,106.43

GYE45-KRR-B-VA-HLA

Corrosion-resistant radial insert ball bearing GYE.., spherical outer ring surface, grub screws in inner ring for location on shaft, compensating for misalignment, sealed on both sides, with plastic cage, relubricatable, INA

€123.65

Product information "IR75X85X25-EGS"