KBO25-PP-AS

€58.33

Ready for dispatch within 3-5 working days: 19

Product number: 1003081

Manufacturer: INA

Weight: 0.16 kg

Product information "KBO25-PP-AS"

Linear ball bearing KBO.. for shaft guidance systems, machined range, open design - segment cut-out, outer ring hardened and ground, high-precision guidance in plastic cage, seals on both sides, relubricatable, INA

Bore diameter:	25
Outer diameter:	40
Lenght:	58
Sealing:	seals on both sides
Material:	standard

Similar products

DGIL15-UK

Standard rod end DGIL..-UK with pressed spherical plain bearing, sliding pair steel-PTFE, series E, female left hand thread, zinc plated, maintenance-free, Durbal

€10.96

Sold out

GCUR40-MM

Full complement single row track roller GCUR.. with threaded stud, with profiled outer ring, eccentric, metal shielded, incl. lock washer and nut, Nadella

€191.52

Details

NATR17-X

Yoke type track roller NATR.., single row, thick-walled outer ring with cylindrical surface, axial guidance via thrust washers, with inner ring and needle roller and cage assembly, gap seals on both sides, INA

€37.90

DSIL15-ES-2RS

Standard rod end DSIL..-ES with pressed spherical plain bearing, sliding pair steel-steel, series E, female left hand thread, zinc plated, with lip seals on both sides, relubricatable, Durbal

€10.96

Sold out

R065823076

Compact ball bushing KBC-30-DD, ball bushing guides, standard material, POM ball retainer, normal radial internal clearance, wiper seals integrated on both sides, without grease, Rexroth

€20.21

Details

Sold out

NAO25X40X17

Single row needle roller bearing NAO.., radial needle roller bearings, non-locating, without ribs on outer ring, with inner ring, non-self-retaining, steel cage, open, INA

€24.54

Details

KR40

Track roller with solid roller stud, with cage-guided needles and profiled outer ring (contact optimized surface), with hexagon socket, without seals, IDC

€39.35

Sold out

R067312540

Super linear bushing KBB-O-25-D without misalignment compensation, linear bushings, open design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, without wiper seals, Rexroth

€54.81

Details

51204

Axial deep groove ball bearing 512.., single direction, flat housing locating washer (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€10.65

NATV17-X-PP

Yoke type track roller with cylindrical outer ring, with inner ring, full complement needle set, seals on both sides, IDC

€33.11

Sold out

R073302500

Super linear bushing KBH-O-25 for high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, without wiper seals, Rexroth

€80.49

Details

KRV40-X-PP-A-NMT

Stud type track roller KRV..X without eccentric, outer ring with cylindrical profile, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA

€59.58

C316-INOX-2RS

Corrosion-resistant profiled guide roller C..-2RS with pin, double row bearing, concentric, seals on both sides, incl. lock washer and nuts, CTS

€57.89

Sold out

R074252500

Standard linear bushing KBMM-25-DD, tandem with centered square flange, linear bushings, closed robust all-metal design, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€277.80

Details

3203-BD-XL-TVH-L285

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, open design with plastic cage, FAG

€21.64