K15X19X10-A/0-7

€3.04

Ready for dispatch within 3-5 working days: 38

Product number: 1046850

Manufacturer: INA

EAN: 4012802721218

Product information "K15X19X10-A/0-7"

Needle roller cage assembly K.., radial needle roller bearings for direct bearing arrangement, DIN 5405-1/ISO 3030, single-row design, cage made of sheet steel, open, INA

Bore diameter:	15
Outer diameter:	19
Width:	10
Cage:	steel cage
Material:	standard

Similar products

CLK300 15x19

High-quality internal clamping set CLK300, backlash-free shaft-hub connection, non-self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

€3.90

FRNR19-EI

Guide roller FRNR..-EI with needle roller bearing, with threaded stud, slighly convex raceway sides, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella

€92.60

61800-2RSR-HLC

Single row deep groove ball bearing 18.., radial, with steel cage and contact seals on both sides, FAG

€8.09

NX10-Z-XL

Needle roller/axial ball bearing NX.., combined axial radial bearings, without inner ring, full complement single direction axial component, retained by protective cap, for grease lubrication, INA

€24.98

RSTO6-X-TV

Yoke type track roller RSTO.., needle roller bearings, single row, thick-walled outer ring with cylindrical surface, without inner ring, with needle roller and cage assembly (polyamide cage), without axial guidance, open, not self-retaining, INA

€10.99

Sold out

KRE19-PP-A-NMT

Stud type track roller KRE.. with eccentric, outer ring profile optimized, solid roller pin, needles cage-guided, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA

€42.29

Details

LR606-2RSR-HLC

Single row track roller LR6.., deep groove ball bearing based, without pin, thick-walled outer ring with crowned lateral surface of R=500mm, with plastic cage, lip seals on both sides, INA

€16.30

30/7-2RSR-HLC

Double row angular contact ball bearing 30.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, seals on both sides, INA

€19.60

Sold out

R065825176

Compact ball bushing KBC-12-DD-RT, ball bushing guides, standard material, POM ball retainer, reduced radial internal clearance, wiper seals integrated on both sides, without grease, Rexroth

€11.48

Details

R067021040

Super linear bushing KBA-10-DD with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, with wiper seal on one side, Rexroth

€28.70

Sold out

GLG08-20-500

Heavy-duty spherical-plain bearing GLG.., sliding combination steel - DURBAL-Glide (polyamid-PTFE-fibreglass-compound), series G, maintenance-free, Durbal

Price on request

NATR6

Yoke type track roller with profiled outer ring (contact optimized surface), with inner ring and needle cage, without seals, IDC

€12.35

KH12-PP-RROC

Corrosion-resistant linear ball bearing KH.. for shaft guidance systems, compact range, outer ring machined, hardened, perforated, with ball and cage assembly integrated in plastic cage, seals on both sides, relubricatable, INA

€11.95

Sold out

GCL19-EEM-SW

Full complement single row track roller GCL.. with threaded stud, with optimized cylindrical outer ring, concentric, metal shielded, incl. lock washer and nut, Nadella

Price on request

Sold out

LM10-UU-S

Closed standard ball bushing (linear ball bearing), standard, plastic cage, stainless steel balls, seals on both sides, Samick

€10.00

Details