KRV40-X-PP-A

€59.58

Ready for dispatch within 3-5 working days: 157

Product number: 1047464

Manufacturer: INA

EAN: 4012802427752

Weight: 0.24 kg

Product information "KRV40-X-PP-A"

Stud type track roller KRV..X without eccentric, outer ring with cylindrical profile, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, INA

Bore diameter:	18
Outer diameter:	40
Lenght:	58
Sealing:	seals on both sides
Thread size:	M18x1,5
Material:	standard

Similar products

IR35X40X20,5-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€7.94

Sold out

BRTM18-90-502

Heavy-duty rod end BRTM.. in stainless steel, with integral self-aligning roller bearing, series K, male left hand thread, full complement design, with shields on both sides, relubricatable, Durbal

Price on request

ROTEX 19 ALU - MatNr: 020196000047

ROTEX 19 ALU hub Ø13 pilot bored component 1 - #020196000047, torsionally flexible compact claw coupling Rotex® Standard, shaft-shaft connection, KTR

€6.20

K35X40X25-A/0-7

Needle roller cage assembly K.., radial needle roller bearings for direct bearing arrangement, DIN 5405-1/ISO 3030, single-row design, cage made of sheet steel, open, INA

€14.95

Sold out

PM12-01-502

Heavy-duty rod end PM.. with integral self-aligning ball bearing, fine male left hand thread, with shields on both sides, relubricatable, Durbal

€71.33

Details

Sold out

R065805556

Compact ball bushing KBC-30-RT, ball bushing guides, standard material, POM ball retainer, reduced radial internal clearance, without wiper seals, without grease, Rexroth

€18.75

Details

NUKR40-X-A

Stud type track roller NUKR.., solid roller pin, thick-walled cylindrical outer ring, with axial guidance, full complement double-row cylindrical roller set, labyrinth seals on both sides, INA

€64.48

BEFN18-20-502

Heavy-duty rod end BEFN.. with pressed spherical-plain bearing, sliding pair steel-brass, series K, female left hand thread, zinc plated, relubricatable, Durbal

€48.72

Sold out

R067005400

Super linear bushing KBA-25-RT with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, without wiper seals, Rexroth

€69.41

Details

STO17

Yoke type track roller STO.., needle roller bearings, single row, thick-walled outer ring with profiled outside surface, with inner ring and needle roller and cage assembly (steel cage), without axial guidance, open, not self-retaining, INA

€30.55

KRVE40-PP

Eccentric full complement stud type track roller, profiled outer ring (contact optimized surface), with hexagon socket, seals on both sides, IDC

€50.99

Sold out

R063102500

Standard linear bushing KBM-O-25-D, linear bushings, open robust all-metal design, hardened and ground sleeve, with locating hole for axial and radial securing, steel guide cage, with wiper seal on one side, ungreased, Rexroth

€47.54

Details

KR40-X-B-NMT

Stud type track roller KR..X without eccentric, solid roller pin, needles cage-guided, with axial guidance, outer ring with cylindrical profile, gap seals on both sides, incl. nut and lub. nipple, INA

€55.39

PWTR17-2RS

Yoke type track roller with profiled outer ring (contact optimized surface), with center rib and cylindrical rollers, full complement roller set, seals on both sides, IDC

€35.43

Sold out

R073122545

Super linear bushing KBSH-O-25-VD for very high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with complete sealing, Rexroth

€154.10

Details