N208-E
Product information "N208-E"
| Bore diameter: | 40 |
|---|---|
| Outer diameter: | 80 |
| Width: | 18 |
| Cage: | steel cage |
| Bearing clearance: | CN (normal) |
| Material: | standard |
Similar products
Product number:
1062312
Manufacturer:
CMT Line
Weight:
0.4 kg
Single row cylindrical roller bearing N2.., outer ring without ribs, inner ring with two ribs, steel cage, CMT Line
Skip product gallery
NF25 - UF25
Regular price:
€157.47
Built-in roller freewheel UF.., non self-centering (non bearing supported), one keyway on the inner ring, CTS
Sold out
FGU3580-MM
Regular price:
€389.91
Full complement single row track roller FGU.. without pin, heavy series, with extra thick-walled optimized profiled outer ring, non-separable, metal shielded, Nadella
Sold out
GCRL80-EEM-SW
Full complement single row track roller GCRL.. with threaded stud, with optimized cylindrical outer ring, eccentric, metal shielded, incl. lock washer and nut, Nadella
Price on request
Sold out
6307-M-J20AA-C4
Deep groove ball bearing with ceramic coating on outer ring, current insulating, breakdown voltage 3000 VDC, open, with solid brass cage, FAG
Price on request
PAP7540-P10 - 100x
Regular price:
€1,268.79
Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®
PAP7580-P10 - 25x
Regular price:
€769.50
Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®
PAP7560-P10 - 5x
Regular price:
€96.35
Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®
Sold out
3307-DA-MA
Regular price:
€120.83
Double row angular contact ball bearing 33.. with split inner ring, radial ball bearings, O-arrangement design with contact angle α = 45°, open design with brass cage, FAG
PAP7540-P200 - 500x
Regular price:
€12,481.95
Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®
Sold out
QJ208-XL-N2-MPA-T42B
Regular price:
€61.69
Four-point contact bearing QJ2.., radial ball bearings, single row, non self-retaining, solid outer ring with retaining grooves, split inner ring, with brass cage, open design, FAG
PAP7550-P180 - 2500x
Regular price:
€58,391.29
Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®