NA2203-2RSR

€33.65

Ready for dispatch within 3-5 working days: 31

Product number: 1048033

Manufacturer: INA

EAN: 4047643011570

Weight: 0.11 kg

Product information "NA2203-2RSR"

Yoke type track roller NA22.., needle roller bearings, single row, thick-walled outer ring with profiled outside surface, with inner ring and needle roller and cage assembly (steel cage), without axial guidance, lip seals on both sides, INA

Bore diameter:	17
Outer diameter:	40
Width:	16
Cage:	steel cage
Material:	standard

Similar products

Sold out

NUKR40-X-A-NMT

Stud type track roller NUKR.., solid roller pin, thick-walled cylindrical outer ring, with axial guidance, full complement double-row cylindrical roller set, labyrinth seals on both sides, incl. fixing nut, INA

€64.48

Details

PF15-00-501

Heavy-duty rod end PF.. with integral self-aligning ball bearing, female right hand thread, with shields on both sides, relubricatable, Durbal

€71.33

Sold out

R067012540

Super linear bushing KBA-25-D with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with wiper seal on one side, Rexroth

€52.11

Details

STO17-X

Yoke type track roller STO.., needle roller bearings, single row, thick-walled outer ring with cylindrical surface, with inner ring and needle roller and cage assembly (steel cage), without axial guidance, open, not self-retaining, INA

€33.65

NATR17

Yoke type track roller with profiled outer ring (contact optimized surface), with inner ring and needle cage, without seals, IDC

€26.89

Sold out

R065052590

Standard linear bushing KBMT-25-DD-FG, linear bushings, closed robust all-metal design, hardened and ground sleeve, POM guide cage, with two integrated wiper seals, with grease, Rexroth

€104.41

Details

KR40-X-PP-A-NMT

Stud type track roller KR..X without eccentric, outer ring with cylindrical profile, solid roller pin, needles cage-guided, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA

€59.58

C312-ZZ

Profiled guide roller C..-ZZ with pin, double row bearing, concentric, steel shields on both sides, incl. lock washer and nuts, CTS

€31.86

Sold out

R073102500

Super linear bushing KBSH-O-25 for very high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, without wiper seals, Rexroth

€135.63

Details

LR202-RRU

Corrosion-resistant single row track roller LR2.., deep groove ball bearing based, without pin, thick-walled outer ring with crowned lateral surface of R=500mm, with plastic cage, INA

€24.46

KH30-PP

Linear ball bearing KH.. for shaft guidance systems, compact range, outer ring machined, hardened, perforated, with ball and cage assembly integrated in plastic cage, seals on both sides, relubricatable, INA

€14.17

KBO25

Linear ball bearing KBO.. for shaft guidance systems, machined range, open design - segment cut-out, outer ring hardened and ground, high-precision guidance in plastic cage, without seals, INA

€50.03

NUKRU40-H-3AS-V2

Cam follower with shaft, full complement, special design, NTN

Price on request

Sold out

3203-BD-XL-C3

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, open design with steel cage, FAG

€25.79

Details

S203 - CB203

Built-in sprag freewheel CB2.., not self-centering (non bearing supported), one keyway on outer ring, CTS

Price on request