Skip to main content Skip to search Skip to main navigation

NJ2206-E-XL-TVP2-C3

Product information "NJ2206-E-XL-TVP2-C3"

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with solid plastic cage, FAG
Bore diameter: 30
Outer diameter: 62
Width: 20
Cage: polyamide, hard fabric
Bearing clearance: C3 (slightly increased)
Material: standard
Skip product gallery

Similar products

6206-M
Single row deep groove ball bearing 62.., radial ball bearings, cylindrical bore, with solid brass cage, open and not greased, FAG

Price on request
Sold out
BBE40
Closed standard ball bushing (linear ball bearing), standard, plastic cage, without seals, SNR

Price on request
Sold out
DGE35-SX
Angular contact spherical-plain bearing DGE..-SX, sliding combination steel-steel, phosphated, relubricatable, Durbal

Price on request
Sold out
GCUL62
Full complement single row track roller GCUL.. with threaded stud, with cylindrical outer ring, concentric, without seals, incl. lock washer and nut, Nadella

Price on request
Sold out
6206-MA-C3
Single row deep groove ball bearing 62.., radial ball bearings, cylindrical bore, with solid brass cage, open and not greased, FAG

Price on request
Sold out
GLG35-20-500
Heavy-duty spherical-plain bearing GLG.., sliding combination steel - DURBAL-Glide (polyamid-PTFE-fibreglass-compound), series G, maintenance-free, Durbal

Price on request
DGE25-AX
Axial spherical-plain bearing DGE..-AX, sliding combination steel-steel, phosphated, relubricatable, Durbal

Price on request
PAW38-P10 - 1x
Thrust washer PAW.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

Price on request
Sold out
FR62-EI
Guide roller FR..-EI, special rollers, with double row ball bearing, concentric, with NBR seals type RS on both sides, incl. lock washer and nuts, Nadella

Price on request
6206-M-C3
Single row deep groove ball bearing 62.., radial ball bearings, cylindrical bore, with solid brass cage, open and not greased, FAG

Price on request
Sold out
EF25-60-501
Heavy-duty rod end EF.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series E/EH, female right hand thread, maintenance-free, Durbal

Price on request
Sold out
RNAO45X62X40-ZW-ASR1-XL
Double row needle roller bearing RNAO.., radial needle roller bearings, non-locating, without ribs on outer ring, with inner ring, non-self-retaining, steel cage, open, with lubrication hole, INA

Price on request
Sold out
FGUL3062
Full complement single row track roller FGUL.. without pin, light series, with cylindrical outer ring, non-separable, without seals, Nadella

Price on request
DG35-PW
Radial spherical-plain bearing DG..-PW, sliding combination steel-brass, lined with bronze-PTFE-composite, series K, maintenance-free, Durbal

Price on request
Sold out
GCL62-EEM-SW
Full complement single row track roller GCL.. with threaded stud, with optimized cylindrical outer ring, concentric, metal shielded, incl. lock washer and nut, Nadella

Price on request