NKS45-XL

Bore diameter:	45
Outer diameter:	60
Width:	22
Material:	standard

K55X60X20-B/0-7

Needle roller cage assembly K.., radial needle roller bearings for direct bearing arrangement, DIN 5405-1/ISO 3030, single-row design, cage made of sheet steel, open, INA

€10.67

PAP5560-P180 - 2500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€18,593.25

CLK250L 50x60

High-quality internal clamping set CLK250L, backlash-free shaft-hub connection, self-centering design: radially flat - axially long, mounting with axial hub displacement, for low to medium torques, CMT Line

€26.56

PAP5560-P10 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€7,310.94

BEM25-60-502

Heavy-duty rod end BEM.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series K, male left hand thread, maintenance-free, Durbal

€138.05

PAP5540-P14 - 1x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P14 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, little wear, low friction value, no tendency to fuse with metal, KS Permaglide®

€4.20

BEFN25-80-501

Heavy-duty rod end BEFN.. in stainless steel, with pressed spherical-plain bearing, sliding pair steel-brass, series K, female right hand thread, relubricatable, Durbal

€150.17

WS89306

Shaft locating washer WS893.., thrust bearing washers, internally centered, made from through-hardened rolling bearing steel, raceways precision ground, bore and outside diameter precision machined, INA

€36.78

Sold out

AXNBT1560

Combined precision roller bearing AXNBT.., radial bearing part: needle roller bearing with cage, lateral:a xial needle roller bearings with thrust washers, adjustable axial preload, with bolt-on holes, Nadella

Price on request

DRS1560

Seal carrier assy DRS for screwing onto ZARF(L) bearings, complete seal kit consisting of: sealing flange, NBR rotary shaft seal, flange seal and fastening screws, light series, INA

€166.83

PAP5540-P20 - 2500x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P20 with steel backing, for grease or liquid-lubricated applications: contains lead, with oil distributing pockets, ready to install, lifetime lubrication possible, low wear, low sensitivity to edge loading, good damping characteristics, insensitive to impact loads, good chemical resistance, KS Permaglide®

€17,034.23

CLK132 32x60

High-quality internal clamping set CLK132, backlash-free shaft-hub connection, self-centering design: radial standard height - short axial width, mounting with axial hub displacement, for high torques, for medium to high torques, CMT Line

€18.68

PAP5540-P10 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€383.68

DSAL25-T/K

Standard rod end DSAL..-T/K with pressed spherical plain bearing, sliding pair steel-PTFE, series K, male left hand thread, zinc plated, maintenance-free, Durbal

€32.98

K55X60X27-B/0-7

Needle roller cage assembly K.., radial needle roller bearings for direct bearing arrangement, DIN 5405-1/ISO 3030, single-row design, cage made of sheet steel, open, INA

€15.92

Product information "NKS45-XL"