PAF18220-P11 - 25x | Flanged bushing Permaglide® PAF-P11

Bore diameter:	18
Outer diameter:	20
Lenght:	22
Material:	PERMAGLIDE® P11

PAW10-P10 - 2500x

Thrust washer PAW.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€1,669.20

PAP1815-P11 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P11 with bronze backing, for dry running: contains lead, corrosion resistant, very good thermal conductivity, anti-magnetic, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€158.99

BEF06-60-501

Heavy-duty rod end BEF.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series K, female right hand thread, maintenance-free, Durbal

€24.42

PAF18100-P11 - 500x

Flanged bushing PAF.., maintenance-free plain bearing, standard material P11 with bronze backing, for dry running: contains lead, corrosion resistant, very good thermal conductivity, anti-magnetic, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€1,295.00

HF1416-L564

Drawn cup roller clutch HF.. without bearing support, one-way clutches, plastic springs (KF), knurled outer surface, without sealing, to combine with drawn cup needle roller bearings HK and BK, INA

€11.82

PAP1825-P180 - 2500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€3,384.23

Sold out

R133151200

Elastomer wiper seal in metal case of galvanized steel, for segmental linear bushing R0668.., Rexroth

€3.43

Details

IR17X20X20-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€5.21

PAW10-P180 - 1000x

Thrust washer PAW.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€656.96

PAP1815-P200 - 2500x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€3,534.38

BEMN06-20-502

Heavy-duty rod end BEMN.. with pressed spherical-plain bearing, sliding pair steel-brass, series K, male left hand thread, zinc plated, relubricatable, Durbal

€18.82

PAF18170-P180 - 2500x

Flanged bushing PAF.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€3,652.35

PAP1820-P10 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€87.02

PAP1815-P180 - 5000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€5,058.30

PAF18220-P11 - 500x

Flanged bushing PAF.., maintenance-free plain bearing, standard material P11 with bronze backing, for dry running: contains lead, corrosion resistant, very good thermal conductivity, anti-magnetic, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€1,719.80

PAF18220-P11 - 25x

Product information "PAF18220-P11 - 25x"