PAP1415-P10 - 1x

Price on request

Average lead time from new production (poss. with MOQ) in working days: 10-30

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1123409

EAN: 4028977656637

Weight: 0.005 kg

Product information "PAP1415-P10 - 1x"

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

Bore diameter:	14
Outer diameter:	16
Lenght:	15
Material:	PERMAGLIDE® P10

Alternative articles to "PAP1415-P10 - 1x"*

1415DU

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

Sold out

GC16-EE-SW

Full complement single row track roller GC.. with threaded stud, profiled outer ring with optimized radius, concentric, with plastic seals, incl. lock washer and nut, Nadella

€61.33

Details

FG516-EE-SW

Full complement single row track roller FG.. without pin, thick-walled profiled outer ring with optimized radius, lubrication hole on inner ring, with plastic seals, Nadella

€46.55

Sold out

ET1216

Radial seal ring, ET.. series, for sealing needle roller bearings, made of sheet steel-reinforced elastomer, Nadella

Price on request

AX816

Axial needle roller bearing AX.., thin series, single-row axial needle roller cage with built-in thin washer, Nadella

€7.91

Sold out

GCRL16-EEM-SW

Full complement single row track roller GCRL.. with threaded stud, with optimized cylindrical outer ring, eccentric, metal shielded, incl. lock washer and nut, Nadella

Price on request

Sold out

GC16-EEM-SW

Full complement single row track roller GC.. with threaded stud, profiled outer ring with optimized radius, concentric, metal shielded, incl. lock washer and nut, Nadella

€64.11

Details

FG516-EEM-SW

Full complement single row track roller FG.. without pin, thick-walled profiled outer ring with optimized radius, lubrication hole on inner ring, metal shielded, Nadella

Price on request

Sold out

KR16-EE

Cam follower KR.. with concentric pin, with cage-guided needles and convex outer ring, plastic seals on both sides, with screw driver slot, incl. clamping nut, Nadella

€45.87

Details

AXZ5,5816

Axial needle roller bearing AXZ.., single-row axial cage with thick hardened thrust washers held by capsule ring, Nadella

€35.65

Sold out

RNA1005

Full complement needle roller bearing RNA1.., solid and through-hardened outer ring, without inner ring (for combination with inner rings BI.., BIC.., BICG..), without lubrication hole and groove, Nadella

€68.81

Details

GCL16-SW

Full complement single row track roller GCL.. with threaded stud, with optimized cylindrical outer ring, concentric, without seals, incl. lock washer and nut, Nadella

€58.55

Sold out

FGL516-SW

Full complement single row track roller FGL.. without pin, thick-walled optimized cylindrical outer ring, lubrication hole on inner ring, without seals, Nadella

€44.82

Details

Sold out

KRE16-EE

Cam follower KRE.. with pin and eccentric collar, with cage-guided needles and convex outer ring, plastic seals on both sides, with screw driver slot, incl. clamping nut, Nadella

€46.51

Details

Sold out

GCR16-EEM-SW

Full complement single row track roller GCR... with threaded stud, profiled outer ring with optimized radius, eccentric, metal shielded, incl. lock washer and nut, Nadella

€83.72

Details

Sold out

DL1012

Full complement needle bush DL.., oped design, needles retained, thin hardened calibrated outer ring made of drawn strip steel, without inner ring, Nadella

€10.72

Details