PAP4540-P200 - 1x | Cylindrical bushing Permaglide® PAP-P200

Bore diameter:	45
Outer diameter:	50
Lenght:	40
Material:	PERMAGLIDE® P200

PAP4540-P180 - 500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€2,177.76

CPA63-2ZR

Roller with pin CPA.., eccentric, prismatic surface, suitable for sliders CS.., CD.., NS.., ND.. of the Compact Rail, for use on T- and U-rails, lubricated for life, steel shielded on both sides, Rollon

€61.33

Sold out

BRTM20-90-502

Heavy-duty rod end BRTM.. in stainless steel, with integral self-aligning roller bearing, series K, male left hand thread, full complement design, with shields on both sides, relubricatable, Durbal

€268.01

Details

CLK131 25x50

High-quality internal clamping set CLK131, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting without axial hub displacement, for high torques, CMT Line

€24.40

BEMN20-80-502

Heavy-duty rod end BEMN.. in stainless steel, with pressed spherical-plain bearing, sliding pair steel-brass, series K, male left hand thread, relubricatable, Durbal

€93.41

Sold out

LRE11

Adjusting nut LRE.., spring nuts for precise adjustment, balanced radial locking, clamping system with two clamping screws on two spring-loaded threaded surfaces, grooves: 4x90°, Sfero-Nadella

€127.46

Details

BRF20-00-501

Heavy-duty rod end BRF.. with integral self-aligning roller bearing, series K, female right hand thread, cage design, galvanized, with shields on both sides, relubricatable, Durbal

€85.31

CLK500 18x50

Rigid shaft coupling CLK500, backlash-free, bending and torsionally stiff shaft-to-shaft connection, self-centering design, mounting without axial hub displacement, for medium to high torques, CMT Line

€27.22

BRM20-00-501

Heavy-duty rod end BRM.. with integral self-aligning ball bearing, series K, male right hand thread, cage design, galvanized, with shields on both sides, relubricatable, Durbal

€85.31

Sold out

22210-EAK-W33-C3

Double row spherical roller bearing, series 222, tapered bore, steel cage, groove and lubrication holes on outer ring, SNR

€43.79

Details

BEM20-20-502

Heavy-duty rod end BEM.. with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series K, male left hand thread, galvanized, maintenance-free, Durbal

€50.76

PAP4550-P180 - 25x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€159.85

Sold out

RCNR63

Eccentric guide roller RCNR.. with threaded hole for mounting, for LS.. guide rail, double row ball bearing, with NBR seals type RS on both sides, Nadella

Price on request

DGF20-LO

Hydraulic rod end DGF..-LO, housing made of forged heat-treated steel, with pressed spherical-plain bearing DGE..-LO, with square welding end, sliding pair steel-steel, relubricatable, Durbal

Price on request

PAP4550-P180 - 500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€3,008.85

PM4540DX
PG 455040 A
PCM 455040 M
EGB4540-E50
POZ 4540

PAP4540-P200 - 1x

Product information "PAP4540-P200 - 1x"