PAP6070-P200 - 2500x

€53,068.76

Average lead time from new production (poss. with MOQ) in working days: 10-30

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1124637

Weight: 635 kg

Product information "PAP6070-P200 - 2500x"

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

Bore diameter:	60
Outer diameter:	65
Lenght:	70
Material:	PERMAGLIDE® P200

Alternative articles to "PAP6070-P200 - 2500x"*

PM6070DX
PG 606570 A
PCM 606570 M
EGB6070-E50
POZ 6070

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

DGIHO-K 25 DO

Hydraulic rod end DGIHO-K..-DO, housing made of forged heat-treated steel, with pressed spherical-plain bearing DGE..-ES, with slot and clambing arrangement, sliding pair steel-steel, female right hand thread, relubricatable, Durbal

Price on request

DGF30-DO

Hydraulic rod end DGF..-DO, housing made of forged heat-treated steel, with pressed spherical-plain bearing DGE..-ES, with square welding end, sliding pair steel-steel, relubricatable, Durbal

Price on request

Sold out

LF15

Adjusting nut LF.., spring nuts for precise adjustment, axial locking, standard clamping system with two clamping screws on one spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€122.59

Details

Sold out

LFE15

Adjusting nut LFE.., spring nuts for precise adjustment, balanced axial locking, clamping system with two clamping screws on each of two spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€212.11

Details

Sold out

LR16

Adjusting nut LR.., spring nuts for precise adjustment, radial locking, standard clamping system with a clamping screw on spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€105.08

Details

Sold out

LRE16

Adjusting nut LRE.., spring nuts for precise adjustment, balanced radial locking, clamping system with two clamping screws on two spring-loaded threaded surfaces, grooves: 4x90°, Sfero-Nadella

€158.31

Details

Sold out

LRP40.150

Adjusting nut LRP.., wide type, spring nuts for precise adjustment, heavy-duty radial locking, clamping system with two clamping screw on each of two spring-loaded threaded surfaces, grooves: 4x90°, Sfero-Nadella

€238.09

Details

AX4565

Axial needle roller bearing AX.., thin series, single-row axial needle roller cage with built-in thin washer, Nadella

€16.42

AX54565

Axial needle roller bearing AX.., thick series, single-row axial needle roller cage with built-in thick washer, Nadella

€33.61

Sold out

RNA1040

Full complement needle roller bearing RNA1.., solid and through-hardened outer ring, without inner ring (for combination with inner rings BI.., BIC.., BICG..), with lubrication hole and groove, Nadella

€78.66

Details

Sold out

RNA2040

Full complement needle roller bearing RNA2.., solid and through-hardened outer ring, without inner ring (for combination with inner rings BI.., BIC.., BICG..), with lubrication hole and groove, Nadella

€104.10

Details

Sold out

RNA22040

€115.67

Details

Sold out

DIST-FS52

Spacer ring DIST.. for FS/FSH/FSR/FSX guide rails, for mounting between guide rail and mounting surface, anodized aluminium version, without screw, Nadella

Price on request

RKU65

Guide roller RKU.. with tapered roller bearing, locating roller, convex raceway side, radius R = 400, concentric, sealed on both sides, incl. lock washers and nuts, Nadella

€238.22

FKU65

Guide roller FKU.. with tapered roller bearing, without pin, convex raceway sides, radius R = 400, sealed on both sides, Nadella

€226.65