US201-G2

€7.07

Ready for immediate despatch: 7

Product number: 1028817

Manufacturer: SNR

EAN: 3413529503483

Weight: 0.11 kg

Product information "US201-G2"

Bearing insert US2.. for bearing units, spherical outer ring, fixing by socket set screw, shielded on both sides, SNR

Bore diameter:	12
Outer diameter:	40
Width:	22
Sealing:	cover shields on both sides
Material:	standard

Similar products

Sold out

3203-BD-XL-2HRS-C3

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, with steel cage and contact seals on both sides, FAG

€30.93

Details

NATR17-PP-A

Yoke type track roller NATR.., single row, thick-walled outer ring with profiled surface, axial guidance via thrust washers, with inner ring and needle roller and cage assembly, three-stage sealing on both sides, INA

€38.59

FRN40-EI

Guide roller FRN..-EI with needle roller bearing, with threaded stud, slighly convex raceway sides, concentric, sealed on both sides, incl. lock washers and nuts, Nadella

€141.88

Sold out

R073202500

Super linear bushing KBH-25 for high loads, with misalignment compensation, linear bushings, closed design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, without wiper seals, Rexroth

€76.38

Details

Sold out

LR8

Adjusting nut LR.., spring nuts for precise adjustment, radial locking, standard clamping system with a clamping screw on spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€74.91

Details

ROTEX 19 ST - MatNr: 020195101000

ROTEX 19 ST hub 1.0 Ø10H7 key DIN 6885/1-JS9 > component 1a - #020195101000, torsionally flexible compact claw coupling Rotex® Standard, shaft-shaft connection, KTR

€18.38

3203-BD-XL-TVH-C3

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, open design with plastic cage, FAG

€20.58

R150221083

Single nut with flange, FEM-E-B 25X5RX3-4, Ball screw assemblies, sealed, Rexroth

€318.21

CLK250L 28x40

High-quality internal clamping set CLK250L, backlash-free shaft-hub connection, self-centering design: radially flat - axially long, mounting with axial hub displacement, for low to medium torques, CMT Line

€16.76

Sold out

R065813040

Compact ball bushing KBC-30-D, ball bushing guides, standard material, POM ball retainer, normal radial internal clearance, wiper seal on one side, without grease, Rexroth

€19.54

Details

DGAL15-UK

Standard rod end DGAL..-UK with pressed spherical plain bearing, sliding pair steel-PTFE, series E, male left hand thread, zinc plated, maintenance-free, Durbal

€10.96

203-XL-NPP-B

Self-aligning deep groove ball bearing 2..-NPP-B, radial insert ball bearing with spherical outside surface of the outer ring, cylindrical bore for fit, compensating for misalignment, sealed on both sides, with plastic cage, INA

€11.12

PWTR17-2RS-XL

Yoke type track roller PWTR.., with profiled outer ring (contact optimized surface), with center rib and full complement double-row cylindrical roller set, with axial guidance, full complement roller set, protected lip seals on both sides, INA

€45.34

B7203-C-T-P4S-UL

Super precision angular contact ball bearing B72..-C (spindle bearing), adjusted, contact angle α = 15°, restricted tolerances, open - without seals, universally combinable, FAG

€97.08

C316-ZZ

Profiled guide roller C..-ZZ with pin, double row bearing, concentric, steel shields on both sides, incl. lock washer and nuts, CTS

€38.59