ZMA40/62
€155.59
Ready for dispatch within 3-5 working days: 9
Product information "ZMA40/62"
| Bore diameter: | 40 |
|---|---|
| Outer diameter: | 62 |
| Width: | 22 |
| Thread size: | M40x1,5 |
| Material: | standard |
Similar products
Regular price:
Product number:
1078881
Manufacturer:
INA
Weight:
0.27 kg
Precision locknut ZMA, heavy series, for preloading bearings for screw drives, radially clampable with locking pins, INA
Skip product gallery
NUTR2562-X-A
Regular price:
€64.48
Yoke type track roller NUTR.., with cylindrical outer ring, inner ring and flange rings, full complement roller set, labyrinth seals on both sides, INA
RKY62-NX
Regular price:
€430.61
Corrosion-resistant guide roller RKY.. with tapered roller bearing, with threaded stud, convex raceway side, radius R = 400, concentric, sealed on both sides, incl. lock washers and nuts, Nadella
NJ305-E-XL-TVP2-C3
Regular price:
€27.94
Single row cylindrical roller bearing NJ3.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with solid plastic cage, FAG
RSTO30
Regular price:
€34.93
Yoke type track roller RSTO.., needle roller bearings, single row, thick-walled outer ring with profiled outside surface, without inner ring, with needle roller and cage assembly (steel cage), without axial guidance, open, not self-retaining, INA
Sold out
PKR62-C-NX
Regular price:
€397.72
Corrosion-resistant guide roller PKR.. with tapered roller bearing, track roller, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella
GE30-XL-KRR-B-2C
Regular price:
€29.58
Radial insert ball bearing GE.., spherical outside surface of the outer ring, with eccentric locking collar for mounting on shaft, compensating for misalignment, flinger shields on both sides, with plastic cage, relubricatable, INA
KRE62-PP-A-NMT
Regular price:
€113.75
Stud type track roller KRE.. with eccentric, outer ring profile optimized, solid roller pin, needles cage-guided, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA
Sold out
FR62-EI
Guide roller FR..-EI, special rollers, with double row ball bearing, concentric, with NBR seals type RS on both sides, incl. lock washer and nuts, Nadella
Price on request
Sold out
GCUL62
Full complement single row track roller GCUL.. with threaded stud, with cylindrical outer ring, concentric, without seals, incl. lock washer and nut, Nadella
Price on request
32206-XL
Regular price:
€16.38
Tapered roller bearing 322.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG
B71908-E-T-P4S-UL
Regular price:
€124.54
Super precision angular contact ball bearing B719..-E (spindle bearing), adjusted, contact angle α = 25°, restricted tolerances, open - without seals, universally combinable, FAG
Sold out
PFPL62
Cam follower PFPL.., with reinforced smooth stud design, with cylindrical outer ring, seals on both sides, Nadella
Price on request
Sold out
R067204000
Regular price:
€82.02
Super linear bushing KBB-40 without misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, without wiper seals, Rexroth
6206-M-C3
Single row deep groove ball bearing 62.., radial ball bearings, cylindrical bore, with solid brass cage, open and not greased, FAG
Price on request
ZM40
Regular price:
€27.88
Precision lock nut ZM.., light series, for preloading bearings for screw drives, with two radially placed clamping pins, BGL