PAP2830-P200 - 100x

€417.92

Average lead time from new production (poss. with MOQ) in working days: 10-30

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1122776

EAN: 4028977965012

Weight: 4.26 kg

Product information "PAP2830-P200 - 100x"

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

Bore diameter:	28
Outer diameter:	32
Lenght:	30
Material:	PERMAGLIDE® P200

Alternative articles to "PAP2830-P200 - 100x"*

PM2830DX
PG 283230 A
PCM 283230 M
EGB2830-E50
POZ 2830

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

201-XL-NPP-B

Self-aligning deep groove ball bearing 2..-NPP-B, radial insert ball bearing with spherical outside surface of the outer ring, cylindrical bore for fit, compensating for misalignment, sealed on both sides, with plastic cage, INA

€15.98

FRR32-1AS

Guide roller FRR..-AS, special rollers, pin with internal thread in inner ring, two separate modified ball bearings, eccentric, with NBR seals type RS on both sides, Nadella

Price on request

Sold out

R067112076

Super linear bushing KBA-O-20-D with misalignment compensation, linear bushings, open design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with wiper seal on one side, Rexroth

€42.23

Details

B7002-E-T-P4S-UL

Super precision angular contact ball bearing B70..-E (spindle bearing), adjusted, contact angle α = 25°, restricted tolerances, open - without seals, universally combinable, FAG

€86.64

R067002000

Super linear bushing KBA-20 with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, without wiper seals, Rexroth

€39.35

Sold out

R073202000

Super linear bushing KBH-20 for high loads, with misalignment compensation, linear bushings, closed design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, without wiper seals, Rexroth

€58.80

Details

NBI203216

Needle roller bearing with double-side ribs, single row, with inner ring, with lubrication groove an bore, NRB

€4.65

Sold out

DGIHN-K 12 LO

Hydraulic rod end DGIHN-K..-LO, housing made of forged heat-treated steel, with pressed spherical-plain bearing DGE..-LO, with slot and clambing arrangement, sliding pair steel-steel, female right hand thread, relubricatable, Durbal

Price on request

Sold out

R074122530

Standard linear bushing KBMFT-25-DD-NR, tandem with square flange, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€416.91

Details

6002-C-2HRS-C3

Single row deep groove ball bearing 60.., radial, with steel cage and contact seals on both sides, FAG

€2.67

BRTF12-00-501

Heavy-duty rod end BRTF.. with integral self-aligning roller bearing, series K, female right hand thread, cage design, galvanized, with shields on both sides, relubricatable, Durbal

€85.31

PAP2830-P10 - 2500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€5,772.98

Sold out

7201-B-XL-JP-UO

Angular contact ball bearing 72..-B-JP, single-row, contact angle α = 40°, with sheet steel cage, open - without seals, not greased, FAG

€25.83

Details

BRM12-00-501

Heavy-duty rod end BRM.. with integral self-aligning ball bearing, series K, male right hand thread, cage design, galvanized, with shields on both sides, relubricatable, Durbal

€52.04

PAP2830-P200 - 25x

€109.91