63007-A-2RSR

€16.87

Ready for dispatch within 3-5 working days: 451

Product number: 1042288

Manufacturer: FAG

EAN: 4012802331769

Weight: 0.21 kg

Product information "63007-A-2RSR"

Single row deep groove ball bearing 630.., radial, with steel cage and contact seals on both sides, FAG

Bore diameter:	35
Outer diameter:	62
Width:	20
Sealing:	seals on both sides
Cage:	steel cage
Bearing clearance:	CN (normal)
Material:	standard

Similar products

7305-B-XL-MP

Angular contact ball bearing 73..-B-MP, single-row, contact angle α = 40°, with solid brass cage, open - without seals, not greased, FAG

€34.33

Sold out

BBE40

Closed standard ball bushing (linear ball bearing), standard, plastic cage, without seals, SNR

Price on request

Sold out

NJ305-E-XL-M1A-C3

Single row cylindrical roller bearing NJ3.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with outer ring rib-guided two-piece brass cage, FAG

€61.03

Details

NA4908-XL

Needle roller bearing of series NA49.., single row, outer ring with two ribs, inner ring without ribs (removable), steel cage, open design, INA

€32.83

CSK30-P - UKC30-ZZ

Sprag type freewheel UKC.., ball bearing freewheels, dimensions according to ball bearing 62.., self-centering, one keyway on the inner ring, shielded on both sides, operating temperature -10°C to +60°C, CTS

€46.51

NU305-E-XL-M1-C3

Single row cylindrical roller bearing NU3.., non-locating bearing, two locating ribs on outer ring, inner ring without ribs with cylindrical bore, open, non-greased, separable, with brass cage, FAG

€58.06

NATR30-X-PP-A

Yoke type track roller NATR.., single row, thick-walled outer ring with cylindrical surface, axial guidance via thrust washers, with inner ring and needle roller and cage assembly, three-stage sealing on both sides, INA

€62.94

Sold out

FGL3062-SW

Full complement single row track roller FGL.. without pin, thick-walled optimized cylindrical outer ring, lubrication hole on inner ring, without seals, Nadella

€151.83

Details

NJ2206-E-XL-TVP2-C3

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with solid plastic cage, FAG

€33.23

PWKRE62-2RS-XL

Stud type track roller PWKRE.., solid roller pin with eccentric collar, thick-walled outer ring with centre rib and profiled outer surface, with axial guidance, full complement double-row cylindrical roller set, lip seals on both sides, INA

€137.07

FRR62-EU

Euroroller FRR..-EU, with double row angular contact ball bearing, light convex raceway side, eccentric, with NBR seals type RS on both sides, incl. lock washer and nuts, Nadella

€190.21

GRAE30-XL-NPP-B-FA125.5

Corrosion-resistant radial insert ball bearing GRAE.., spherical outside surface of the outer ring, with eccentric locking collar for mounting on shaft, compensating for misalignment, sealed on both sides, with plastic cage, relubricatable, INA

€25.48

KR62-B

Stud type track roller KR.. without eccentric, solid roller pin, needles cage-guided, with axial guidance, outer ring with crowning profile R500, gap seals on both sides, INA

€88.03

FRNR62

Special guide roller FRNR.. with needle roller bearing, raceway with O-ring, slighly convex raceway sides, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella

€524.50

Sold out

1206-K-TVH-C3 + H206

Self-aligning ball bearing 12.., double row radial ball bearings, tapered bore with 1:12 taper, open, with plastic cage, not greased, complete with adapter sleeve H.., FAG

€14.41

Details