NUP206-E-XL-M1-C3

Bore diameter:	30
Outer diameter:	62
Width:	16
Cage:	brass cage
Bearing clearance:	C3 (slightly increased)
Material:	standard

NCF2206-V

Single row cylindrical roller bearing, support bearing, two fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, full complement rolling element, IDC

€66.03

Sold out

NUP206-E-XL-M1

Single row cylindrical roller bearing NUP2.., locating bearing, two locating ribs on outer ring, inner ring with locating rib and rib washer, cylindrical bore, open, non-greased, with two-piece roller guided brass cage, FAG

€68.38

Details

Sold out

7305-B-XL-TVP-P5

Angular contact ball bearing 73..-B-TVP, single-row, contact angle α = 40°, with solid polyamide cage, open - without seals, not greased, FAG

€47.54

Details

NNF5007-PP

Double row cylindrical roller bearing, locating bearing, three fixed ribs on inner ring, one fixed center rib on outer ring, full complement roller set, sealed on both sides, IDC

€70.97

NJ206-E-XL-M1A

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with outer ring rib-guided two-piece brass cage, FAG

€62.20

ZKLN3062-2RS-2AP-XL

Double row axial angular contact ball bearing, precision bearings for screw mounting, without fixing holes, matched pair, seals on both sides, INA

€748.31

NUTR30-X

Yoke type track roller with cylindrical outer ring, inner ring and flange rings, full complement roller set, labyrinth seals on both sides, IDC

€50.37

NJ2206-E-XL-M1A

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with outer ring rib-guided two-piece brass cage, FAG

€72.15

7206-B-XL-MP-UA

Angular contact ball bearing 72..-B-MP, single-row, contact angle α = 40°, with solid brass cage, open - without seals, not greased, FAG

€41.61

KB40-PP

Linear ball bearing KB.. for shaft guidance systems, machined range, closed design, outer ring hardened and ground, high-precision guidance in plastic cage, seals on both sides, INA

€61.75

NU206-E-XL-M1

Single row cylindrical roller bearing NU2.., non-locating bearing, two locating ribs on outer ring, inner ring without ribs with cylindrical bore, open, non-greased, separable, with brass cage, FAG

€54.23

ZMA40/62

Precision locknut ZMA, heavy series, for preloading bearings for screw drives, radially clampable with locking pins, INA

€155.59

KN40-B-PP

Linear ball bearing KN.. for shaft guidance systems, lightweight range, closed design, plastic cage with inserted raceway plates, angle-adjustable, relubricatable, seals on both sides, INA

€53.22

NU2305-E-XL-M1-C3

Single row cylindrical roller bearing NU2.., non-locating bearing, two locating ribs on outer ring, inner ring without ribs with cylindrical bore, open, non-greased, separable, with brass cage, FAG

€75.98

SD50X62X5-A

Double-lip sealing ring SD.., contacting radial rotary shaft seals, for sealing needle roller bearings, consisting of two plastic components: Polyamide body and sealing element made of PU elastomer, INA

€3.47

Product information "NUP206-E-XL-M1-C3"