PAP6030-P180 - 100x | Cylindrical bushing Permaglide® PAP-P180

Bore diameter:	60
Outer diameter:	65
Lenght:	30
Material:	PERMAGLIDE® P180

PAP6070-P200 - 1000x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€22,288.89

Sold out

FKU65-V

Guide roller FKU.. with tapered roller bearing, without pin, convex raceway sides, with Viton seals (up to 120°C) on both sides, radius R = 400, Nadella

€242.60

Details

PAP6030-P180 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€6,592.37

CLK130 38x65

High-quality internal clamping set CLK130, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting with axial hub displacement, for high torques, CMT Line

€24.04

PAP6060-P180 - 5x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€59.98

CLK133 38x65

High-quality internal clamping set CLK133, backlash-free shaft-hub connection, self-centering design: radial standard height - short axial width, mounting without axial hub displacement, for medium to high torques, CMT Line

€20.26

KMFE9

Lockable precision lock nut KMFE.., for locking of machine components on shafts, with four slots on the circumference and integrated radial locking element, metric right-hand thread, BGL

€27.94

AM40

Precision locknut AM, for preloading bearings for screw drives, axially clampable with four segments, INA

€109.27

Sold out

RNA22040

Full complement needle roller bearing RNA2.., solid and through-hardened outer ring, without inner ring (for combination with inner rings BI.., BIC.., BICG..), with lubrication hole and groove, Nadella

€115.67

Details

Sold out

LRE16

Adjusting nut LRE.., spring nuts for precise adjustment, balanced radial locking, clamping system with two clamping screws on two spring-loaded threaded surfaces, grooves: 4x90°, Sfero-Nadella

€158.31

Details

PAP6070-P200 - 2500x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€53,068.76

Sold out

FKU65-NX-V

Corrosion-resistant guide FKU.. with tapered roller bearing, without pin, convex raceway sides, with Viton seals (up to 120°C) on both sides, radius R = 400, Nadella

€545.92

Details

PAP6070-P180 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€19,040.19

CLK130 40x65

High-quality internal clamping set CLK130, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting with axial hub displacement, for high torques, CMT Line

€24.04

PAP6040-P180 - 25x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€243.95

6030DP4
PG 606530 F
PCM 606530 E
EGB6030-E40
TFZ 6030

PAP6030-P180 - 100x

Product information "PAP6030-P180 - 100x"