PAW28-P20 - 1x | Thrust washer Permaglide® PAW-P20

Bore diameter:	28
Outer diameter:	48
Height:	1,5
Material:	PERMAGLIDE® P20

Sold out

LFE9

Adjusting nut LFE.., spring nuts for precise adjustment, balanced axial locking, clamping system with two clamping screws on each of two spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€164.98

Details

IR40X48X40-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€16.71

PAW28-P14 - 2500x

Thrust washer PAW.., maintenance-free plain bearing, standard material P14 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, little wear, low friction value, no tendency to fuse with metal, KS Permaglide®

€4,043.33

PAW28-P200 - 1x

Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

Price on request

PM17-00-502

Heavy-duty rod end PM.. with integral self-aligning ball bearing, male left hand thread, with shields on both sides, relubricatable, Durbal

€95.05

NK38/20-XL

Needle roller bearing NK.., light series, open single row design, ribs on outer ring, without inner ring, steel cage, INA

€16.23

PAW28-P10 - 2500x

Thrust washer PAW.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€3,990.19

PAW28-P200 - 30x

Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€140.36

R151228013

Single nut with flange, FEM-E-S 25X25RX3,5-2, Ball screw assemblies, sealed, Rexroth

€341.53

Sold out

DL4020

Full complement needle bush DL.., oped design, needles retained, thin hardened calibrated outer ring made of drawn strip steel, without inner ring, Nadella

€22.82

Details

PAW28-P10 - 30x

Thrust washer PAW.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€84.33

PAW28-P180 - 2500x

Thrust washer PAW.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€4,225.16

PAW28-P20 - 10x

Thrust washer PAW.., low-maintenance plain bearing, standard material P20 with steel backing, for grease or liquid-lubricated applications: contains lead, with oil distributing pockets, ready to install, lifetime lubrication possible, low wear, low sensitivity to edge loading, good damping characteristics, insensitive to impact loads, good chemical resistance, KS Permaglide®

€33.00

CLK300 42x48

High-quality internal clamping set CLK300, backlash-free shaft-hub connection, non-self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

€6.06

IR40X48X23-IS1-OF-XL

Inner ring IR..-IS for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, with lubrication hole, INA

€13.75

PAW28-P20 - 1x

Product information "PAW28-P20 - 1x"