PAW28-P200 - 250x | Thrust washer Permaglide® PAW-P200

Bore diameter:	28
Outer diameter:	48
Height:	1,5
Material:	PERMAGLIDE® P200

PAW28-P20 - 50x

Thrust washer PAW.., low-maintenance plain bearing, standard material P20 with steel backing, for grease or liquid-lubricated applications: contains lead, with oil distributing pockets, ready to install, lifetime lubrication possible, low wear, low sensitivity to edge loading, good damping characteristics, insensitive to impact loads, good chemical resistance, KS Permaglide®

€153.47

Sold out

DLF4016

Full complement needle bush DLF.., closed end design, needles retained, thin hardened calibrated outer ring made of drawn strip steel, without inner ring, Nadella

Price on request

R151234014

Adjustable-preload single nut, SEM-E-S 32X10RX3,969-5, Ball screw assemblies, sealed, Rexroth

€519.09

Sold out

LFE9

Adjusting nut LFE.., spring nuts for precise adjustment, balanced axial locking, clamping system with two clamping screws on each of two spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€164.98

Details

PAW28-P20 - 10x

Thrust washer PAW.., low-maintenance plain bearing, standard material P20 with steel backing, for grease or liquid-lubricated applications: contains lead, with oil distributing pockets, ready to install, lifetime lubrication possible, low wear, low sensitivity to edge loading, good damping characteristics, insensitive to impact loads, good chemical resistance, KS Permaglide®

€33.00

R151228013

Single nut with flange, FEM-E-S 25X25RX3,5-2, Ball screw assemblies, sealed, Rexroth

€341.53

CLK300 42x48

High-quality internal clamping set CLK300, backlash-free shaft-hub connection, non-self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

€6.06

R151234013

Single nut with flange, FEM-E-S 32X10RX3,969-5, Ball screw assemblies, sealed, Rexroth

€355.06

GM4048

Sprag type freewheel cage GM.. without rings, Built-In Freewheels, for installation between inner and outer ring of metric dimensions, CTS

€84.51

PAW28-P180 - 50x

Thrust washer PAW.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€123.24

Sold out

R155231003

Single nut with flange, FEM-E-S 35X5LX3,5-4, Ball screw assemblies, sealed, Rexroth

Price on request

Sold out

ARZ103048

Axial roller bearing ARZ.. with cylindrical rollers, light series, axial cage with thick hardened thrust washers held by capsule ring, Nadella

€131.00

Details

PAW28-P180 - 1000x

Thrust washer PAW.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€1,742.72

PM17-00-501

Heavy-duty rod end PM.. with integral self-aligning ball bearing, male right hand thread, with shields on both sides, relubricatable, Durbal

€95.05

AXZ83048

Axial needle roller bearing AXZ.., single-row axial cage with thick hardened thrust washers held by capsule ring, Nadella

Price on request

PAW28-P200 - 250x

Product information "PAW28-P200 - 250x"